Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 04-22-2013, 04:32 PM
Jasonn B's Avatar
Jasonn B Jasonn B is offline
LawnSite Member
 
Join Date: May 2007
Location: USA
Posts: 116
Cub Cadet Tank m60 (2006) Idler pulley bearing just went...

My 2006 Cub cadet tank idler pulley bearing just came off. Can you just get the bearing by themselves, or do you have to get a new pulley every time?

Part Number: 02004447
Description: CUB CADET PULLEY-FLAT IDLER

Thanks. There is also an aftermarket pulley by "Stens", 02004447 and not sure if it's as good as cub brand, but was told it was.
Reply With Quote
  #2  
Old 04-22-2013, 07:14 PM
Breezmister's Avatar
Breezmister Breezmister is offline
LawnSite Bronze Member
 
Join Date: Jul 2007
Location: South Jersey
Posts: 1,207
Quote:
Originally Posted by Jasonn B View Post
Thanks. There is also an aftermarket pulley by "Stens", 02004447 and not sure if it's as good as cub brand, but was told it was.
Stens sells good stuff, the part number you need is 280-794
__________________
.
Masters Degree in Thinking Out Side Of The Box,Graduate of the MacGyver Institute of Ingenuity

The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic

RTFM What a concept

Reply With Quote
  #3  
Old 04-23-2013, 01:23 PM
Jasonn B's Avatar
Jasonn B Jasonn B is offline
LawnSite Member
 
Join Date: May 2007
Location: USA
Posts: 116
Thanks, yep found it for an incredible price here:

http://www.sjmparts.com/flat-idler-c...4-p-16931.html
Reply With Quote
  #4  
Old 04-24-2013, 06:20 PM
Dstosh Dstosh is offline
LawnSite Senior Member
 
Join Date: Jun 2002
Location: Western New York
Posts: 714
You have to get a new one every time.
Reply With Quote
  #5  
Old 04-24-2013, 06:22 PM
Jasonn B's Avatar
Jasonn B Jasonn B is offline
LawnSite Member
 
Join Date: May 2007
Location: USA
Posts: 116
Seems so. The bolt that goes through the pulley is still on the tractor. I guess when the bearing failed, the pulley came off, but nothing else. Now I can't get the bolt off, lol. Soaked it in wd-40 and some tabasco, but not luck yet.
Reply With Quote
  #6  
Old 04-24-2013, 06:26 PM
Dstosh Dstosh is offline
LawnSite Senior Member
 
Join Date: Jun 2002
Location: Western New York
Posts: 714
We've changed them in the trailer. Its a pain, but it can be done.
Reply With Quote
  #7  
Old 04-24-2013, 06:27 PM
Jasonn B's Avatar
Jasonn B Jasonn B is offline
LawnSite Member
 
Join Date: May 2007
Location: USA
Posts: 116
Any tips? This one has been on since 2006.
Reply With Quote
  #8  
Old 04-24-2013, 06:59 PM
Dstosh Dstosh is offline
LawnSite Senior Member
 
Join Date: Jun 2002
Location: Western New York
Posts: 714
Mapp gas torch heat it up.
Reply With Quote
  #9  
Old 04-26-2013, 08:25 PM
Jasonn B's Avatar
Jasonn B Jasonn B is offline
LawnSite Member
 
Join Date: May 2007
Location: USA
Posts: 116
Thanks! Got it off. Looks like there are two washers.

1) One goes on each side of the pulley?

2) And how tight do I make the nut?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:16 PM.

Page generated in 0.07034 seconds with 9 queries