Register free!

The Green Industry's Resource Center


Reply
 
Thread Tools   Display Modes
  #1  
Old 04-24-2013, 06:44 PM
G.P.M. G.P.M. is offline
LawnSite Member
 
Join Date: Apr 2013
Location: Southwest Ont
Posts: 1
Talking Seal coating driveways

Hello everyone.. Just looking for some opinions..
I own a small property maintenance company doing small residential grass cutting and was looking to expand a bit this summer doing some asphalt driveway seal coating. I am licenced and insured. My questions:
1. Since I wasn't looking to spend thousands of dollars on equipment, I was wondering what your opinions would be of doing residential driveways by hand squeegee method.

2.My local independent building supply place carries "Resistoseal Professional Grade Rubberized Asphalt Sealer" and was wondering if anyone has had experience with this brand.

3. The same company also sells resistoseal rubberized crack filler in a caulking tube and liquid crack filler in a bottle. Is this good enough for most smaller jobs?

4. Do most companies offer warranty with this service and if so, how long?

5. Whats best for cutting in the edges, a paintbrush or small roller?

6. Any other tips or tricks to help me get going would be greatly appreciated.
Thanks!
Reply With Quote
  #2  
Old 04-24-2013, 07:28 PM
whiffyspark whiffyspark is online now
LawnSite Fanatic
 
Join Date: Jul 2011
Location: Chesapeake beach
Posts: 5,505
There's a ton of reading here and on other forums. You will get 10 different opinions.
Posted via Mobile Device
Reply With Quote
  #3  
Old 04-24-2013, 08:58 PM
viper881 viper881 is offline
LawnSite Member
 
Join Date: Oct 2009
Location: Michigan
Posts: 132
For cutting in edges I use 24" n 36" brushes
Reply With Quote
  #4  
Old 04-28-2013, 07:54 PM
prestige101 prestige101 is offline
LawnSite Member
 
Join Date: Mar 2012
Location: cedar springs mi
Posts: 25
i try to use a 10 in" brush as much as posable to reduce brush marks as it wears
Reply With Quote
  #5  
Old 07-15-2013, 02:06 PM
jamsealcoating.com jamsealcoating.com is offline
LawnSite Member
 
Join Date: Jul 2013
Location: Portland, OR
Posts: 4
1. Highly recommend the squeegee method. You leave a good amount of material to actually fill in the voids of the asphalt.

2. Instead of going to a building supply, try to look for a local sealcoat plant that manufacturers their own sealer.

3. It will work but not as good as a hot rubberized crack filler. You really want to look into getting a hot rubberized crack machine. A ma-10 is a good start.

4. I offer a warranty on my craftsmanship. It depends on the total amount of coats and the condition of asphalt before being sealed. Any where from 1-3 years.

5. A stand up brush with soft bristles is the best.

6. Good luck!
__________________
Owner and Operator of Johnson Asphalt Maintenance providing sealcoating to the Portland Metro area. Over 20 years experience in sealcoat and general asphalt maintenance.
Reply With Quote
  #6  
Old 10-13-2013, 08:54 AM
miahrg miahrg is offline
LawnSite Member
 
Join Date: Oct 2013
Posts: 2
I also like the squeegee method, but make sure you apply a thin layer
otherwise it will crack
I don't know resistoseal but if it's rubberized and thick you may have to apply it with a squeegee
Reply With Quote
Reply

Tags
driveway , seal coating , sealer

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:48 AM.

Page generated in 0.06122 seconds with 7 queries