Advanced Search

The Green Industry's Resource Center

Old 06-28-2013, 11:40 PM
beebop beebop is offline
LawnSite Member
Join Date: Jul 2012
Location: pembroke ga.
Posts: 20
Help. Kawi not charging.

i have a 19 hp (601v) kawasaki motor on a 52"cut hustler. Just rebuilt the motor. Since rebuilding , the battery has not been charging.checked the stator and no power coming from it. Replaced it, and my battery is still not charging. Could it be the magnets on the flywheel or am i missing something. Can you replace just the magnets or do you have to replace the whole flywheel. Thanks for your help.
Old 06-29-2013, 09:37 AM
hustlermidwest hustlermidwest is offline
LawnSite Senior Member
Join Date: Sep 2012
Location: Chicago, Ill
Posts: 636
The Magnets would be toward the last thing I look at. I would look at your Regulator and the charging wires. I don't have a book infront of me but believe it's the purple wire going into the reg. Make sure it's clean and secure. Go to, get your manual and recheck your wiring on the engine after the rebuild. I'm thinking something got overlooked.

Brian O
Old 07-01-2013, 01:03 PM
beebop beebop is offline
LawnSite Member
Join Date: Jul 2012
Location: pembroke ga.
Posts: 20
will check, but.

ok. thanks. but I do have to ask. I checked wires coming from new stator with volt meter,still showing no power coming through. I am not a mech.,know enough to get myself in trouble. do you check power from stator from both sides of wire connector, or each individual side to ground.maybe I am checking it wrong.????

thanks in advance.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 11:14 AM.

Page generated in 0.05341 seconds with 10 queries