Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 06-23-2013, 05:05 PM
italianstallion69 italianstallion69 is offline
LawnSite Member
 
Join Date: Sep 2012
Posts: 108
buying a wheel skid case 410

2005 case 410 ~2000 hours. hand controls, looks like manual attach.


are these case skids pretty reliable? my operator wants a pt50 terex but that I feel thats out of budget for this month.

any known problems with the 410?
aside from testing it and, looking at tires, looking at pivot pin sloppiness is there anything else to look at ?

Thanks
Reply With Quote
  #2  
Old 06-23-2013, 05:37 PM
alldayrj's Avatar
alldayrj alldayrj is offline
LawnSite Silver Member
 
Join Date: Apr 2012
Location: Long island, NY
Posts: 2,785
Looks like power tach to me
__________________
RJ All Day
Masonry and Landscapes
www.rjfalcone.com
Reply With Quote
  #3  
Old 06-23-2013, 06:31 PM
Digdeep Digdeep is online now
LawnSite Bronze Member
 
Join Date: Dec 2005
Location: Madison, WI
Posts: 1,744
I'd check over the engine service record really well. That 2.2L engine had massive head gasket issues. It wasn't uncommon to see three or four gasket failures.
Posted via Mobile Device
Reply With Quote
  #4  
Old 06-23-2013, 07:58 PM
ksss's Avatar
ksss ksss is online now
LawnSite Fanatic
 
Join Date: Jan 2003
Location: Rigby, Idaho
Posts: 6,857
I rented a Series 3 410 last week to spread material in a basement. It had pilot controls (ISO, that sucked). I can say that the machine in the picture has way too much bucket on it. I have not ran a skid steer this small in probably 12 years, may be longer than that. Overall, kept to light duty type work it would likely fine. It has no turbo and at about 5K feet it was noticeable. I would put 12X16.5 tires on it, even if you give up a little compactness. Also it could use some counter weight. Lift power was very good, but its too light in the asss to take advantage of that. Break out was marginal. If the machine has 2000 ours on it, I would say they have the updated head gasket design. Its hard to keep machines this size in perspective if you don't spend a lot of time on them. Having not run anything under 85 hp in over a decade its easy to call it underpowered, but it had lift hooks on it and it was easy to crane the machine where I needed it with a 160 sized excavator so I cant bitchh too much.
__________________
See us at www.kaiserskidsteer.com

Proudly running CASE and Takeuchi equipment.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:51 AM.

Page generated in 0.05927 seconds with 9 queries