Go Back   LawnSite.comô - Lawn Care & Landscaping Business Forum, Discuss News & Reviews > Sponsor Forums - Discuss with Sponsors Directly > Lawn Mowing Equipment & Accessories * * * * SPONSOR FORUMS > Hustler Turf Equip
User Name
Password
Home Products Find a Dealer News About Us Contact Us Mark Forums Read


Hustler Turf Equip Lawn Mowers & Turf Care Equipment

Reply
 
Thread Tools Display Modes
  #1  
Old 06-26-2013, 11:40 AM
chevybogger chevybogger is offline
LawnSite Member
 
Join Date: Jun 2013
Location: Columbus, TX
Posts: 4
30HP Kohler Command Pro on Super Z

Again the only other issue with my 2008 Hustler Super z. I have the 30HP Kohler Command Pro engine and sometimes when I start it and am not at full throttle it sounds funny as if it were only running on 1 cylinder or half the power but it isn't missing, just sounds weak then I can rev it up and down and it's like the governor or carb opens up and then it levels out and has full power? Anyone else had this problem?
THANKS
Reply With Quote
  #2  
Old 06-26-2013, 09:55 PM
hustlermidwest hustlermidwest is offline
Sponsor
 
Join Date: Sep 2012
Location: Chicago, Ill
Posts: 536
You could be running on one cylinder at that time for 50 different reason. The engine is designed to run wot. Let her rip and run like she was made to do. I would check the idle ports in the carb. If the low end jets are dirty it will run funny. A little sea foam wouldn't hurt.

Brian O
Reply With Quote
  #3  
Old 06-27-2013, 08:55 AM
chevybogger chevybogger is offline
LawnSite Member
 
Join Date: Jun 2013
Location: Columbus, TX
Posts: 4
it is more like a governor issue, like its not opening all the way up, because even at WOT sometimes it will not level out and I have to reve it back and forth and after about 5-10 revs it will level out and be running smoothly. I do like the seafoam idea though.
Reply With Quote
  #4  
Old 06-27-2013, 11:05 AM
Sharpcut 1's Avatar
Sharpcut 1 Sharpcut 1 is offline
LawnSite Senior Member
 
Join Date: Sep 2006
Location: Roseville, MI
Posts: 450
Coils. Check your spec # against Kohler service bulletin 300. You should be able to update your engine using kit # 24 755 173 for 30 HP. Gives you coils and wiring harness. Early 2008 blocks with the SAM module (black box on cover) do not have the correct flywheel and you will have to replace these with the coils that end in -36. Most 2008's are built without the SAM box and able to be updated. Have your dealer look up the Service Bulletin I listed if not familiar with it.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:04 PM.

Forum Rules:

This hustlerturfequipment.com sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.

All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.

LawnSite.com is not affiliated with the Excel Hustler company. This forum is provided by LawnSite.com to Excel Hustler in order to better server their customers


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
Lawnsite,  Plowsite, WeldingWeb, LawnCareSuccess, Everythinggreen, & Lawnbusiness.net are trademarks of Lawn Care Success, Inc

Page generated in 0.06779 seconds with 7 queries