Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 10-09-2012, 06:21 PM
09daxman 09daxman is offline
LawnSite Member
 
Join Date: Jul 2011
Location: Oakdale, MN
Posts: 61
FS 98 Toro Z325 low hours

Hey there everyone.

I have a 98 Toro Z325 for sale, it has a 48 inch deck, 25 hp kohler motor that was just tuned up at last oil change which was 10 hours ago. At the oil change I also replaced the oil lines going to the oil filter. The unit has 571 hours on it, and it runs great. The reason why im selling is cause I bought a newer John Deere 717. I didnt use it for commercial use but the previous owner did. As you can see in the pictures that it has a couple of rips in the seat, could use new drive tires, and could use a new set of blades also it still cuts and bags just fine. The last thing that I would want to point out is that the hopper does have 2 damaged spots, both from previous own and both do not affect performance, but I want to point them out, im not trying to hide anything. The first one you can see in the pics on the top of the hopper the guy put a piece of metal over it to fix the hole. The other spot is on the bottom side of the hopper, there is a crack in it. They are just getting a little dull and has a couple of decent chips in them. Im located by the twin cities in MN. If you have any questions please feel free to ask. Im asking 2400 OBO I would like to get rid of it before winter.





Reply With Quote
  #2  
Old 10-13-2012, 11:53 AM
09daxman 09daxman is offline
LawnSite Member
 
Join Date: Jul 2011
Location: Oakdale, MN
Posts: 61
TTT will trade for a snowmobile.
Posted via Mobile Device
Reply With Quote
  #3  
Old 10-13-2012, 12:55 PM
grassman177's Avatar
grassman177 grassman177 is offline
LawnSite Fanatic
 
Join Date: Oct 2007
Location: leavenworth, kansas
Posts: 9,794
cool machine, what deck is on that? special for the model, or a sfs
__________________
all is fair in love and grass! Man, it smells like sheet, do you smell that!!
Reply With Quote
  #4  
Old 10-13-2012, 01:57 PM
09daxman 09daxman is offline
LawnSite Member
 
Join Date: Jul 2011
Location: Oakdale, MN
Posts: 61
To tell you the truth I really don't know but it has a 48 inch cutting path and it works great. Picks up everything as you go.
Posted via Mobile Device
Reply With Quote
  #5  
Old 10-18-2012, 08:05 PM
09daxman 09daxman is offline
LawnSite Member
 
Join Date: Jul 2011
Location: Oakdale, MN
Posts: 61
TTT will trade for snow plow, other lawn equipment, and snowmobiles.
Posted via Mobile Device
Reply With Quote
  #6  
Old 10-21-2012, 12:06 AM
L.L.C L.L.C is offline
LawnSite Member
 
Join Date: May 2012
Location: Reform Alabama
Posts: 2
Nice machine!! Why is the spring on the right side of the deck not hooked up? I have the same mower with a blown motor. You wouldn't happened to have a extra gas tank would you.
Posted via Mobile Device
Reply With Quote
  #7  
Old 10-21-2012, 09:15 PM
09daxman 09daxman is offline
LawnSite Member
 
Join Date: Jul 2011
Location: Oakdale, MN
Posts: 61
I didn't notice that the spring came off, the bolt backed off from the vibrations. But I have that all taken care of used it for 9 hours this past weekend. It works great!! But sorry I do not have an extra gas tank. You should just buy this one and keep your other one for parts, so if you ever need parts they are right there!!!
Posted via Mobile Device
Reply With Quote
  #8  
Old 10-22-2012, 12:44 AM
L.L.C L.L.C is offline
LawnSite Member
 
Join Date: May 2012
Location: Reform Alabama
Posts: 2
Where are you located? I couldn't give you what your asking anyway
Posted via Mobile Device
Reply With Quote
  #9  
Old 10-22-2012, 01:47 PM
09daxman 09daxman is offline
LawnSite Member
 
Join Date: Jul 2011
Location: Oakdale, MN
Posts: 61
I'm located in oakdale MN, which is right by the twin cities.
Posted via Mobile Device
Reply With Quote
  #10  
Old 05-29-2013, 04:31 PM
09daxman 09daxman is offline
LawnSite Member
 
Join Date: Jul 2011
Location: Oakdale, MN
Posts: 61
Bump it up! I replaced the drive tires and seat. Still asking 2400!
Posted via Mobile Device
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:58 AM.

Page generated in 0.07668 seconds with 9 queries