Old 03-02-2003, 02:35 PM
Northwest Northwest is offline
LawnSite Member
Join Date: Mar 2000
Location: Washington State
Posts: 138
PSI to spray lawns

I have a new spray rig and was wondering what psi is normally used to spray lawns? Teejet lawn gun, pressure gauge mounted just after the hypro D30 pump before 300 feet of hose.
Reply With Quote
Old 03-02-2003, 05:17 PM
Ric's Avatar
Ric Ric is offline
LawnSite Fanatic
Join Date: Sep 2001
Location: S W Florida
Posts: 11,996

I use 30 PSI at the pump on a D 30 to spray lawns The way that I do it is to set the pressure regulator at about 75 PSI. I then put the wand in the tank and turn it on. I then open the mix valve until the pressure drops to about 30 PSI. This way I am all ways stirring the tank even when spraying. When I turn off the wand I check The PSI at the pump. I know what it is and will check from time to time. Bigger droplets are less likely to drift and I think the bigger the droplet size the better the response when applying Liquid Fert.

Everybody does it different. How fast you run the pump, what size tip, How much area you are spraying and gun Vs wand all play a part. I am an old man so I walk slow and use a small tip.

Other will post how they do it. Try them all and see what works for you, But be sure once you have a way to stay will it because you need the have a system to be sure you know how much you are putting down.

I have a water meter so I just mark the tank, spray a known area and refill the tank to that mark to see what my coverage is. Others, Time how long it takes to fill a 5 gallon bucket and then time a given area.

Good Luck

it is one thing to do a off label applications. It is total stupidity to post it on the world wide web and expect people to approve.

You can lead a Donkey to water but you can't make the Jackass Drink

My People Skills are Fine. It is my Idiot Tolerance Skills That needs Work.

Reply With Quote
Old 03-03-2003, 09:29 AM
SWD SWD is offline
LawnSite Senior Member
Join Date: Aug 2002
Location: Central Texas - West of Austin in the Hill Country
Posts: 989
I agree with Ric - however always check the label first. Some herbicides have stated max and min pressures and volume of water to a given area. When I encounter these differences in how I am currently calibrated vs what the label wants, I will recalibrate - but the customer still pays for my time.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 08:21 PM.

Page generated in 0.06618 seconds with 8 queries