Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 09-04-2013, 11:22 PM
sehitchman sehitchman is online now
LawnSite Senior Member
 
Join Date: Apr 2009
Location: West, GA
Posts: 553
dove tail on landscape trailer

I'm looking at a couple of used trailers. I like the idea of the dovetail, but do they drag and get hung up more than a standard trailer? If you have one, would you do it again?
__________________
My wife said "you're on lawn toy restriction"
Reply With Quote
  #2  
Old 09-05-2013, 03:35 AM
jsslawncare's Avatar
jsslawncare jsslawncare is offline
LawnSite Bronze Member
 
Join Date: Feb 2011
Location: North Georgia
Posts: 1,658
dove tail on landscape trailer

I've got both and I guess it's never hit the ground.
__________________
All equipment is wore out. <- Never mind. All equipment has been repainted and with new decals. It's like I have new mower's again!
48" Ferris WB
36" Ferris WB
All Echo hand helds
<- That's how I feel at the end of the day.
Reply With Quote
  #3  
Old 09-09-2013, 01:49 PM
weaver weaver is offline
LawnSite Bronze Member
 
Join Date: Sep 2009
Posts: 1,135
I get in some tight neighborhood areas & sometimes find I have to back in someones drive to get turned around & with the angles on some of the driveways there is no way I could do that with a dovetail. I see guys all the time dragging pulling out of gas stations also...
Posted via Mobile Device
Reply With Quote
  #4  
Old 09-15-2013, 10:59 PM
slinky slinky is offline
LawnSite Member
 
Join Date: Nov 2007
Location: upstate ny
Posts: 122
mine drags here and there but i have it set where the tongue sits a little lower on the truck and i run my zero turn in the middle and my stander at the back... walk behind and push mower at the front...seems to be working well and tires are wearing well...had it sitting higher before and dragged the back alot and bad wear on the tires. i wouldn't go without the beaver tail now. i never raise the decks to put the mowers on the trailer.
Reply With Quote
  #5  
Old 09-16-2013, 07:27 AM
rreyn1812's Avatar
rreyn1812 rreyn1812 is offline
LawnSite Senior Member
 
Join Date: Sep 2008
Location: Central Arkansas
Posts: 444
Got an 18 ft PJ with a 2 ft dovetail. Love it! Rare to scrape or drag it, but it has happened, but then so did a non-dovetail trailer I had. Wouldn't buy a new trailer without it.
Reply With Quote
  #6  
Old 09-25-2013, 01:30 PM
Bobcatter2 Bobcatter2 is offline
LawnSite Member
 
Join Date: Apr 2008
Location: Florida
Posts: 21
Best of both worlds?

You can always weld some skid rollers on the back part of the frame.
Something like this, probably a better price out there:
http://www.rjays.com/Trailer-parts/t...-wheels-01.htm
Attached Images
 
Reply With Quote
  #7  
Old 09-29-2013, 08:05 PM
TNGrassCutter's Avatar
TNGrassCutter TNGrassCutter is online now
LawnSite Bronze Member
 
Join Date: Apr 2010
Location: Tennessee
Posts: 1,296
I had one on a 16 ft trailer with 3500 lb axles. I wouldn't buy one with a dovetail again, it drags everywhere. My 20 ft 14 k low pro gooseneck has one but it sits about 10-12" higher than my 16' did so it doesn't drag.
Posted via Mobile Device
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:57 PM.

Page generated in 0.07299 seconds with 10 queries