Go Back   LawnSite.comô - Lawn Care & Landscaping Business Forum, Discuss News & Reviews > Sponsor Forums - Discuss with Sponsors Directly > Lawn Mowing Equipment & Accessories * * * * SPONSOR FORUMS > Hustler Turf Equip
User Name
Password
Home Products Find a Dealer News About Us Contact Us Mark Forums Read


Hustler Turf Equip Lawn Mowers & Turf Care Equipment

Reply
 
Thread Tools Display Modes
  #1  
Old 09-01-2013, 12:48 PM
Synergy Ground's Avatar
Synergy Ground Synergy Ground is offline
LawnSite Member
 
Join Date: Jul 2007
Location: Zone 8
Posts: 94
VX4 Deck Pusher Arms ??? Help

Just purchased a used (300 Hour) Super Z. Guy said he hated it because the deck wouldnt cut. Owning 2 other Super Z's with same deck, I figured i could fix it in 20 minutes. 6 HOURS later im completely stumped. Ive followed deck leveling instructions to a T.
Best i can tell it seems like the "Deck Pusher Arms" are holding the entire deck up. I can undo all of the adjusting rods, foot pedal, etc.. and the front of deck hits the dirt, the rear stays suspended about 4" with loose chains. WTF is going on???? Its almost like the rear of the deck is levitating. Any help would be greatly appreciated.
__________________

Save the earth, for it is the only place with bird dogs!
Reply With Quote
  #2  
Old 09-01-2013, 02:51 PM
hustlermidwest hustlermidwest is offline
Sponsor
 
Join Date: Sep 2012
Location: Chicago, Ill
Posts: 530
stat at simple. Do the pusher arms move. Try grease?

Brian O
Reply With Quote
  #3  
Old 09-01-2013, 08:39 PM
Synergy Ground's Avatar
Synergy Ground Synergy Ground is offline
LawnSite Member
 
Join Date: Jul 2007
Location: Zone 8
Posts: 94
Thanks Brian, you've helped me again. After looking at the pusher arms the right side is froze up. I've removed the arms and have it soaking in Blaster. Will try to heat with torch tomorrow and see if it will move. Any idea what a new set of pusher arms cost?
Thanks.
__________________

Save the earth, for it is the only place with bird dogs!
Reply With Quote
  #4  
Old 09-03-2013, 10:52 AM
hustlermidwest hustlermidwest is offline
Sponsor
 
Join Date: Sep 2012
Location: Chicago, Ill
Posts: 530
If you go to Hustlerturf.com and look up the part number you need, I'll get you a ballpark price. On the bottom of the page is a link for manuals. Click on that and your model should be available.

Brian O
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:25 AM.

Forum Rules:

This hustlerturfequipment.com sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.

All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.

LawnSite.com is not affiliated with the Excel Hustler company. This forum is provided by LawnSite.com to Excel Hustler in order to better server their customers


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
Lawnsite,  Plowsite, WeldingWeb, LawnCareSuccess, Everythinggreen, & Lawnbusiness.net are trademarks of Lawn Care Success, Inc

Page generated in 0.06776 seconds with 7 queries