Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 09-02-2013, 04:56 PM
mowisme mowisme is online now
LawnSite Senior Member
 
Join Date: Apr 2007
Location: Fitchburg, Wisconsin
Posts: 805
couple Peerless trans questions -parts?

I think for most part this trans I took off a parts Scag48 is ok. It shifted solid with minimal play in lever. I want to put this on my other scag as that one has ton's of shifter slop. But as would be my luck.. bottom pulley was messed up and took hours to get off. I ended up splitting the case in half and taking the whole shaft out to get it off. I think as long as I got it apart- what should I replace and where to get the stuff? Thinking the 4 brass bushings and all the rubber washers. Bearings look good. Is J-thomas the place to go? I saw some negative post before on their time frame in sending? Since Tecumseh is gone- where do I get 'Bentonite' grease and how much goes in?- Thanks a million guys.
Reply With Quote
  #2  
Old 09-05-2013, 03:12 AM
zspeed130 zspeed130 is offline
LawnSite Member
 
Join Date: Sep 2006
Location: Indianapolis,Indiana
Posts: 161
I got bentonite at a local independent. I would ship you my left over if t was cost efficient. 32oz cost me $22, but only calls for 12oz

I used rtv to seal the case but it ended up being a waste by he time I got it back together. My tranny was a 700 series on a gravely 50 wb

Good luck!
Reply With Quote
  #3  
Old 09-05-2013, 07:14 AM
herler herler is offline
LawnSite Gold Member
 
Join Date: Apr 2012
Posts: 3,389
Personally I don't think they're worth rebuilding, then again your luck may differ from my own but it has mostly to do with the cost of the parts... I found I was up to $50 and $80 in parts quick, then 2 hours of labor into it and I couldn't say for sure whether I did everything right, could just be beginner's luck (or lack thereof) but after it was all said and done I can get a new one from Russo Power for just under $200 and I'm done.

Last edited by herler; 09-05-2013 at 07:19 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:05 AM.

Page generated in 0.05749 seconds with 9 queries