Old 09-14-2013, 02:08 AM
Fubba Fubba is offline
LawnSite Senior Member
Join Date: Aug 2005
Location: Middle GA
Posts: 352
Spray Truck set-up help

Just got our first dedicated spray truck. Found it somewhat locally on craigslist and bought it because it was a fantastic deal. The truck alone was worth more than paid. It has two Oldham 200 gallon tanks, Honda motor, pump, and two reels. One is a manual reel with a smaller hose for trees and ornamentals while the other is powered with the turf hose.

Here are my questions:
The pickup on the tanks is on the side with a PVC pipe straight down about 1/2" from the bottom of the tanks. The problem is, I can't get the tanks completely empty. They are also pretty dirty inside although the guy I bought it from said he put tank cleaner in it. Do you guys have a drain on yours? If so, what should I get?

There are no agitators. Again, what do I need to buy to add these?

Is there anything else I need to get? I'd like to get this thing ready to go for the first round of pre.
Posted via Mobile Device
Reply With Quote
Old 09-14-2013, 02:18 AM
greendoctor greendoctor is online now
LawnSite Fanatic
Join Date: Mar 2008
Location: Honolulu, Hawaii
Posts: 8,300
Re do the pick up tube so it goes completely down to the bottom. The end of the pick up should have small notches cut into the end so even if it touching bottom, it is not dead ended. I use the Hypro jet agitation nozzles fitted with DCER-6 discs. These are ceramic discs instead of the usual plastic or steel, so no rust and a long wear life. Those are mounted on a tee at the end of a down pipe bulk headed into the tank. The agitation line is tapped off of the high pressure line feeding the hose reel. Do not take the agitation from the bypass off of the pressure regulator if you are running a plunger or diaphragm pump. You also do not do this to a roller pump either.
They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
Benjamin Franklin 1775

Sell not virtue to purchase wealth, nor Liberty to purchase power.
Benjamin Franklin Poor Richard's Almanac1738
Reply With Quote
Old 09-14-2013, 12:07 PM
RigglePLC's Avatar
RigglePLC RigglePLC is online now
LawnSite Fanatic
Join Date: Jul 2006
Location: Grand Rapids MI
Posts: 10,973
Its tough to get that last ounce or two out of the tank. You seldom need to get it completely dry, luckily. Some kind of hand pump or bilge pump should work for that problem. You may want to use a high-pressure power washer if you need to remove some kind of sticky residue. When pumping out...be sure to park the truck on the steepest part of your drive or a steep hill...to get the water to flow to where you can get at it.

In my case I used my sprayer with a Hypro diaphragm pump for many years with the agitation connected to the pressure regulator bypass hose. When not spraying, all flow from the pump goes to the agitation nozzles. I used a section of poly tubing to go from the top inside of the tank to carry the agitation flow to the bottom. A plastic pipe tee then allowed me to add four Delavan agitation nozzles. They were aimed to provide the maximum swirling and rotation of the spray solution.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 06:18 PM.

Page generated in 0.06308 seconds with 10 queries