Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 10-03-2013, 10:42 PM
jcan jcan is offline
LawnSite Member
 
Join Date: Feb 2013
Location: lyman SC
Posts: 40
26hp efi walker running rough??

I have a 03 walker 26hp efi just bought used, it cranks and idles great and the blades come on great. Once I idle the mower to almost or full idle the mower starts sputtering and running rough while sitting still, when I try to drive it and mow with the same thing happens, and I won't even be mowing grass just turn the blades on and it acts like it wants to cut off but never does. And after a few minutes of use the engine light comes on the will go back off shortly after. I ran the codes and it came up 34. Unplugged the computer and plugged it back up and ran almost the same but codes then read 61. Shut it off and restarted it and they ran 34 again? What's the deal? I was thinking just a fuel filter and plugs but that wouldn't make the mower run a 34 code would it? Maybe an oxygen (o2 sensor) Any help would be greatly appreciated and sorry for the poor explanation guys just tried to tell it as good as I could lol.
Posted via Mobile Device
Reply With Quote
  #2  
Old 10-03-2013, 10:44 PM
Armsden&Son Armsden&Son is online now
LawnSite Silver Member
 
Join Date: Jan 2013
Location: adirondacks, NY
Posts: 2,065
I have the same model and while I can't help you (sorry, just learning the engine myself) How are you reading the codes? I thought only the dealer was able to do this....
Reply With Quote
  #3  
Old 10-04-2013, 08:05 AM
jcan jcan is offline
LawnSite Member
 
Join Date: Feb 2013
Location: lyman SC
Posts: 40
You just stick you key in and turn it on and off 2 times and on the third time wait with the key in and you'll see the engine light start flashing. Turn the key like this On-off On-off On.... It will blink a few times then pause then start blinking again, (two series of blinks) count the put them together and you have your code.
Posted via Mobile Device
Reply With Quote
  #4  
Old 10-04-2013, 03:03 PM
jcan jcan is offline
LawnSite Member
 
Join Date: Feb 2013
Location: lyman SC
Posts: 40
Anyone??? need help on this so i can hopefully have it running soon!
Reply With Quote
  #5  
Old 10-04-2013, 07:41 PM
ZX12R ZX12R is offline
LawnSite Senior Member
 
Join Date: Apr 2003
Location: Morris County,NJ
Posts: 752
Did previous owner offer any history of past problems or work done?How many hours are on the machine?
Reply With Quote
  #6  
Old 10-04-2013, 07:44 PM
jcan jcan is offline
LawnSite Member
 
Join Date: Feb 2013
Location: lyman SC
Posts: 40
Just the new blower installed, around 3000 hours
Posted via Mobile Device
Reply With Quote
  #7  
Old 10-04-2013, 08:17 PM
ZX12R ZX12R is offline
LawnSite Senior Member
 
Join Date: Apr 2003
Location: Morris County,NJ
Posts: 752
If fuel filter is original,i would do that as a no brainer. Not saying its that,but,i would start there. Fuel pump can also do that.Mine started acting up at 2400 hours. Normal pressure is 39 psi where mine was in the 20's. Check fuel lines and in particular,the pick up line in the tank.Mine was split high in the tank and was sucking air.

Oxygen sensor will also throw the code you mentioned.Also,check to see if you have any cracks in your muffler.There were also grounding issues on earlier models. If you have a metal cased computer,its probably not grounded properly from the factory.

You going to try to fix it yourself,or are u bringing it to the dealer?
Reply With Quote
  #8  
Old 10-04-2013, 08:25 PM
Sharpcut 1's Avatar
Sharpcut 1 Sharpcut 1 is offline
LawnSite Senior Member
 
Join Date: Sep 2006
Location: Roseville, MI
Posts: 450
Code 34 is Maximum Adaption limit reached. I've never seen that before. I would clean all grounds, disconnec computer and clean pins (be very carefull FRAGILE) let it sit unhooked for an hour, with battery unhooked, and try again. Code 61 is just telling you everything is OK.
Reply With Quote
  #9  
Old 10-04-2013, 08:26 PM
jcan jcan is offline
LawnSite Member
 
Join Date: Feb 2013
Location: lyman SC
Posts: 40
Was going to try to fix it myself as I have an older walker coming out of the dealer right now that I had to shell out a lot for lol. Would the fuel pump make the code go off like that? I'll put new fuel lines and filter on tomorrow, it only sputters and skips on high idle would that still be fuel pump symtoms? So I need to check grounds that come off the computer or that the computer is bolted on?
Posted via Mobile Device
Reply With Quote
  #10  
Old 10-04-2013, 08:50 PM
ZX12R ZX12R is offline
LawnSite Senior Member
 
Join Date: Apr 2003
Location: Morris County,NJ
Posts: 752
Quote:
Originally Posted by jcan View Post
Was going to try to fix it myself as I have an older walker coming out of the dealer right now that I had to shell out a lot for lol. Would the fuel pump make the code go off like that? I'll put new fuel lines and filter on tomorrow, it only sputters and skips on high idle would that still be fuel pump symtoms? So I need to check grounds that come off the computer or that the computer is bolted on?
Posted via Mobile Device
If fuel pump is bad I am not sure about the code it may trigger but I assume it would if fuel pressure is low.

If u do replace fuel line,some of itis high pressure line so u cant just use regular fuel line.Make sure its rated for high pressure.

"]it only sputters and skips on high idle would that still be fuel pump symtoms"

Mine did exactly that but it also did that with a clogged fuel filter a couple of years ago.

The computer is bolted on.Check to see if the computer is metal cased or plastic.If metal,Kohler has a grounding kit i believe.They started running a ground from the metal case to the battery ground on the frame because the computer was sending false signals to the O2 sensor.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 12:38 AM.

Page generated in 0.08782 seconds with 8 queries