Advanced Search

The Green Industry's Resource Center

Old 11-04-2013, 09:12 PM
alohazabel alohazabel is offline
LawnSite Member
Join Date: Nov 2013
Location: syracuse, ny
Posts: 14
exmark turf tracer hp hydro belt tensioner spring

I have an exmark turf tracer hp 52"

Its about ten or 12 years old. MODEL: TT5217KAC SERIAL# 300671

I was mowing along today and the mower stopped then wouldn't move. runs fine, but no movement.

I looked underneath the mower, and the hydro drive belt seemed way to loose. then I found a big tensioner spring on the ground. I'm assuming I just need to reattach the spring, to tension the belt but I can't figure out where it goes, and I can't find a good diagram anywhere

I checked the user manual and parts manual on but the diagrams didn't really help

Anybody have a link to a good diagram of the hydro drive belt, idler arm, etc?

Or an explanation of where the tensioner spring goes?

Any guess on why the spring came off? Its not broken or worn.

Thanks in advance.
Reply With Quote
Old 11-05-2013, 09:03 AM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Silver Member
Join Date: Jul 2008
Location: chesapeake, va
Posts: 2,614
There is usually a bolt sticking down thru the motor deck that the spring hooks to. Coulda broke, look for a stub. You wanna make sure the idler pulley is in good shape and the arm pivot is greased up and free.
It ain't rocket science! far.

'Course if yer house has more wheels than yer truck...
" Old age ain't for sissies "
Reply With Quote
Old 11-05-2013, 04:03 PM
Exmark PR Exmark PR is offline
Join Date: May 2009
Location: Beatrice, Nebraska
Posts: 238
The best way we can help you is through a phone conversation. Can you call us at 402-223-6375?
Exmark Customer Service
Reply With Quote
Old 11-05-2013, 06:23 PM
alohazabel alohazabel is offline
LawnSite Member
Join Date: Nov 2013
Location: syracuse, ny
Posts: 14

thanks bigfish and exmark.

Once I found the bolt the spring hooks to, I took the belt off the idler arm pulley, pushed the idler arm as far forward as it would go, and stretched the spring to the bolt with a brake spring tool. A piece of pipe or a big screw driver would work too.

Then I pushed the idler arm toward the front of the mower, slipped the belt back on and I was mowing.

Thanks again.

Still not sure why it came off though.
Reply With Quote

diagram , exmark , hydro drive belt , spring

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 08:59 AM.

Page generated in 0.06124 seconds with 8 queries