Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 11-12-2013, 08:12 PM
exmarkking's Avatar
exmarkking exmarkking is offline
LawnSite Bronze Member
 
Join Date: Mar 2008
Location: North Georgia
Posts: 1,000
Redmax bcz2650s trimmer

I'm having issues with a redmax bcz2650s trimmer. Almost two years old. Cranks and idles fine, bogs down when you give it gas. The only way it will rev up is when the choke is on half way. It has a clean air filter, new plug, new fuel filter. I even had a carb kit in the tool box that I installed, that didn't help at all. What else could it be?
Posted via Mobile Device
Reply With Quote
  #2  
Old 11-12-2013, 08:15 PM
Landrus2's Avatar
Landrus2 Landrus2 is offline
LawnSite Platinum Member
 
Join Date: Dec 2006
Location: Big apple
Posts: 4,691
Remove your muffler and clean port
Reply With Quote
  #3  
Old 11-12-2013, 11:17 PM
exmarkking's Avatar
exmarkking exmarkking is offline
LawnSite Bronze Member
 
Join Date: Mar 2008
Location: North Georgia
Posts: 1,000
I'll check, but do you really think it could be clogged after a year of use and using 93 octane with the best synthetic oil?
Reply With Quote
  #4  
Old 11-13-2013, 01:52 AM
tigerepairdotcom tigerepairdotcom is online now
LawnSite Member
 
Join Date: Sep 2013
Location: duluth, ga
Posts: 245
Carb high side adjustment in my opinion. They sometimes fall out of adjustment from the vibrations.

I even had a carb kit in the tool box that I installed (Meaning you were in the carb. Right? being 2 years old is fine Did this thing ever sit longer than 30 days without starting?)

You should really start everything you own with an engine Adleast 1`ce every 20 days

Try to adjust high side and let us know.
__________________
It is very important for you to post your results once the problem is solved so that people will be able to reference a solution to their problem down the road. YEARS may go by and someone has the same problem PLEASE POST YOUR "IT WAS FIXED WITH x SOLUTION.
Reply With Quote
  #5  
Old 11-13-2013, 03:07 AM
exmarkking's Avatar
exmarkking exmarkking is offline
LawnSite Bronze Member
 
Join Date: Mar 2008
Location: North Georgia
Posts: 1,000
I use all equipment everyday, except for the weekends. Can you tell me how to get the cap off the adjustments?
Posted via Mobile Device
Reply With Quote
  #6  
Old 11-13-2013, 01:18 PM
MBDiagMan MBDiagMan is offline
LawnSite Senior Member
 
Join Date: Nov 2004
Location: NE Texas
Posts: 635
I agree with the suggestion to at least check the exhaust port.

Also, have you checked the soft lines that go into the fuel tank? Check them for condition, but also if it has been apart, make sure they have not been switched.
Reply With Quote
  #7  
Old 11-13-2013, 02:14 PM
tigerepairdotcom tigerepairdotcom is online now
LawnSite Member
 
Join Date: Sep 2013
Location: duluth, ga
Posts: 245
Can you tell me how to get the cap off the adjustments?

Redmax 521533801, LIMITER CAP TOOL 8488W90080

Redmax 521533801, LIMITER CAP TOOL 8488W90080
Click to enlarge

Price $11.09
Part # 521533801
Manufacturer Redmax
__________________
It is very important for you to post your results once the problem is solved so that people will be able to reference a solution to their problem down the road. YEARS may go by and someone has the same problem PLEASE POST YOUR "IT WAS FIXED WITH x SOLUTION.
Reply With Quote
  #8  
Old 11-13-2013, 08:52 PM
dboyd351 dboyd351 is offline
LawnSite Senior Member
 
Join Date: Sep 2010
Location: Cape Charles, VA
Posts: 855
Quote:
Originally Posted by Landrus2 View Post
Remove your muffler and clean port
And the screen, if you have one still installed.
By the way in your first post it was almost 2 years old, one post later it was a year newer.
Check the exhaust first.
Reply With Quote
  #9  
Old 11-13-2013, 09:37 PM
exmarkking's Avatar
exmarkking exmarkking is offline
LawnSite Bronze Member
 
Join Date: Mar 2008
Location: North Georgia
Posts: 1,000
Really? It's over a year old but not two years yet. I don't remember the exact month it was purchased and don't really care because the age of the unit isn't going to determine the problem. Their is no screen in the exhaust, I rip all of them out before I leave the parking lot on new equipment. I checked the exhaust port today and it's clean. It must be something with the carb but what? I've put a rebuild kit in it. Coukdnt possibly be trash in it since I blew every thing out when installing the carb kit. Maybe it's sucking air from somewhere like a gas line or primer bulb?
Posted via Mobile Device
Reply With Quote
  #10  
Old 11-13-2013, 09:50 PM
scaguy1 scaguy1 is offline
LawnSite Member
 
Join Date: Nov 2013
Location: blairstown nj
Posts: 5
I would try cleaning the carb and exhaust port or adjusting the carb
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:31 AM.

Page generated in 0.08455 seconds with 9 queries