#1




Calculating square feet??
A problem I have when calculating lawns is converting "inches" over to "decimal points" on the calculator. I am sure there are measuring wheels that might do this, but mine does not. I know that 10'6" would be converted to 10.5 on the calculator, but how would you convert say......10'10" on the calculator. I have a TI83 graphing calculator and I almost bet there is a feature on there to do this, but I have not looked yet and was just curious what you other out there were doing.
Also, would someone mind sharing the formula on how to calculate a triangle? There was a thread on this awhile back and some posted many odd calculations. Thanks MATT
__________________
PROGRESSIVE LAWN & LANDSCAPE Check out my website www.progressivelawn.com www.wichitalawnmowing.com www.partybuswichitaks.com "We are what we repeatedly do. Excellence, then, is not an act, but a habit."  Aristotle "Simplicity is the ultimate sophistication."  Leonardo da Vinci 
#2




I dont believe that the 83 has a converter. I just checked mine and i could not find it. I know for sure though that the TI86 and up have a converter, so you may want to be extra good and plead with santa.
Just round up. In the whole scheme of things, what is 6" or less going to matter. For triangle, its half the length times the height. (LxW)/2 
#3




I don't suppose it matters a whole lot, but sure would be nice to have a measuring wheel that converted the inches to decimals. I guess you could call me a convenient freak.
MATT
__________________
PROGRESSIVE LAWN & LANDSCAPE Check out my website www.progressivelawn.com www.wichitalawnmowing.com www.partybuswichitaks.com "We are what we repeatedly do. Excellence, then, is not an act, but a habit."  Aristotle "Simplicity is the ultimate sophistication."  Leonardo da Vinci 
#4




Re: Calculating square feet??
Quote:

#5




I'm curious how you measure the area of your yards, because many lawns are not really even a simple rectangle, take culdesacs for example.
__________________
Superior Lawn LawnBoy push mower Echo SRM 225 Hitachi Handheld blower '99 Ford Ranger XLT 
#6




Really now guys, this isn't that hard.
1" = .083 foot and for each 1/4 quarter foot you add an extra .001 IE: 10" = 10 X .083 + .003 = .833 foot This will certainly get you close enough for yard work.
__________________

#7




You have to look at the irregularly shaped yards and see what "shapes" make it up. You might have to do a number of different calculations if you want to get the square footage pegged really close.
I just did one where the main body of the front yard was a rectangle, sandwiched on the sides and "top" by three triangles. The side yard was, for lack of better terms, a lopsided oval  with different widths running it's length. Turned out to be 8,135 sq. ft. & just eyeballing it I thought maybe 10,000. The shrubs, borders, ect., add up. When I measured a portion of the yard to be 69 ft. 10 in., I just round up to 70 ft. If it was 10 ft. 2 in., I round down to 10 ft. 
«
Previous Thread

Next Thread
»
Thread Tools  
Display Modes  


Layout Style: