Click Here for Magazine Sites and Subscriptions



















Groundskeeper Hustler Go iLawn Wright Lawn Solutions MowPart.com Better Outdoor Products
Tanaka BlackBurn Flag Turfco Drafix - Pro Landscape Insect Control Systems Toro

  #1  
Old 10-08-2000, 05:36 PM
snow
Guest
 
Posts: n/a
I know this has been brought up in the past, but with all the new people, i thought i'd ask again. does anyone here use wing plows? i've seen some f350 dumps for sale in the truck trader w/ a one way plow and wings on them. does anyone use them? if so, what kind, and do they help productivity?

thanks,

bryan
  #2  
Old 10-08-2000, 06:05 PM
GeoffDiamond GeoffDiamond is offline
LawnSite Bronze Member
 
Join Date: Dec 1999
Location: Maine
Posts: 1,575
These types of set ups are common to towns with lots of small roads. Come to maine and you can find tons of them, for a dime a dozen. I don't have any wings yet, however when i replace on of my L 9000s, i am going to replace it with an all purpose body, and a frink resverable plow, and wing.

Geoff
  #3  
Old 10-08-2000, 06:53 PM
cat320 cat320 is offline
LawnSite Senior Member
 
Join Date: Aug 2000
Location: eastern,Ma
Posts: 663
To get a wing you would have to have mega snow to pay for the extra cost<At dyer sales in mass they thought it was crazy to be putting a wing on an international but tey paid to do it so they put it on but the shop forman thought that it was a waste of there money for mass any way.
  #4  
Old 10-08-2000, 08:03 PM
diggerman diggerman is offline
LawnSite Senior Member
 
Join Date: Aug 2000
Location: Iowa
Posts: 691
When you to the extra cost of a wing you obviously are talking new because used trucks with wings cost no more or even less ,no one wants the hastle.I bought an Oshkosh with wing, belly blade and sander,I cut them all of but the sander.My road grader is an old county machine with wing we have never even had it mounted.Most all of the older wing plows are cable operated, newer models are hydros,and cables mean problems unless you have someone who is careful and understands the risks of dealing with cable and not getting their finger cut off.Geoff I assume is going to use a wing on road ways which is were they were intended to be used,for parking lots, wings are very unresponsive.they are hard to see when down and hard to see around when up.
  #5  
Old 10-08-2000, 09:13 PM
GeoffDiamond GeoffDiamond is offline
LawnSite Bronze Member
 
Join Date: Dec 1999
Location: Maine
Posts: 1,575
Currently i am not useing any wings. 10' fisher plow, on an f 650 or 750, handles a private road just fine. Yes wings have advantages for stacking snow, however i used to do roads with a 9' and a 1 ton, and never had a big problem. My big plow trucks, 650s and 750s, also do some lots, so i haven't added a wing for that reason. Plus for a good wing system ya need a class 8 truck, class 5 - 7 really don't cut it. Also the road has to be set up right for a wing, meaning no tress really close to the side of the road, and even ground at least 3 feet away from the edge of the road. Some of my roads could use a wing, with out having to lift it a lot, most would require a lot of lifting.

When i replace one of my L 9000s in about 5 years. Right now i am looking at sterling for replacement. I will get a 2 axel truck, with a all purpose body from Frink or swenson, and a 10' frink reversalbe plow, and a frink wing, both plows with trip edges. Then this truck will do roads, and only roads. The advantage is i can still use it to haul snow, however the body is quite small. The other major difference is the cost is about 90 to 100 K when your done with lights, plows, bodies, registration, and other misc.

My first F 650 has a v-box in it, and it works well, because it has a low profile body ( body with 18" or 2' sides). My new F 650 and F 750, have standard bodies, and will use an under the tailgate spreader system. Right now the 10' fisher plow is run off the electric pump, however if i start to get pump trouble. The hydrolics for the sander are set up with electic valves for a plow and sander in the cab. The contolls are their and the hoses run, so that all i have to do, is add an lift cylinder to the fisher frame, and i am good to go. Right not the wires for the valves are disconnected, to prevent accidintal use.

Geoff

[Edited by GeoffDiamond on 10-09-2000 at 12:26 AM]
  #6  
Old 10-08-2000, 09:59 PM
plowking35 plowking35 is offline
LawnSite Bronze Member
 
Join Date: Dec 1999
Location: S.E. CT
Posts: 1,472
Most wings are run on a serious angle, meaning an 8' wing will only gain you about 4-5' in plowing width. My friend plows the town roads in Sebec Maine, and his truck has a wing on it, they use it mostly for cutting the snow banks back after the storm.
The truck is a 1980's Bison with a 12 yard swensom frame mounted. It has a 450hp detroit 4 cycle and a 13 sp road ranger. It is a beast. He did a driveway last year with, and pushed a full size pick up that was covered in snow about 200' and never knew it.
Dino
__________________
I am not the biggest and I am not the best but I fall somewhere comfortably in between.
  #7  
Old 10-12-2000, 02:55 AM
Snow Pro Snow Pro is offline
LawnSite Member
 
Join Date: Oct 2000
Location: Hammond, Indiana
Posts: 146
I like to use the Pro-Wings that bolt onto the sides of a straight blade to turn a 7 1/2' blade into a 9 1/2' sweep. That doubles my productivity. You guys sound like you're talking about something different.
__________________
www.snowpros.com



  #8  
Old 10-12-2000, 12:20 PM
diggerman diggerman is offline
LawnSite Senior Member
 
Join Date: Aug 2000
Location: Iowa
Posts: 691
Dino was that the same guy that was posting about using a T800 for doing residentials,this bison isn't his daily driver is it.
  #9  
Old 10-13-2000, 09:40 PM
plowking35 plowking35 is offline
LawnSite Bronze Member
 
Join Date: Dec 1999
Location: S.E. CT
Posts: 1,472
Well cosidering the amount of snow they recieve every year, he drives it almost everyday. But no, as a rule he doesnt plow driveways with it. Seems the drive is at the end of a dirt road, and they use the ladies drive as a turnaround. Well my buddy be as nice as he is, thought that it would be a nice gesture to plow the drive as a thank you.
Dino
__________________
I am not the biggest and I am not the best but I fall somewhere comfortably in between.
  #10  
Old 10-13-2000, 09:58 PM
John Allin John Allin is offline
LawnSite Bronze Member
 
Join Date: Sep 2000
Location: Erie, PA
Posts: 1,488
I'll bet "thank you" wasn't one of the terms she thought of saying on that particular day....
__________________
JAA
 
Tanaka Power Equipment
 
Receive a FREE subscription to TURF Magazine by clicking HERE
Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is Off
Smilies are Off
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:08 PM.


Our Links:  PlowSite.com - TreeServicesSite.com - Design-BuildSite.com - SuperintendentSite.com - Moose River Media - Turf Magazine - SportsField Management Magazine - Tree Services Magazine - Landscape and Hardscape Construction Magazine - FarmingForumSite.com - Farming Magazine - Growing Magazine - Forest Products Equipment - Moose River Media Source Book - Superintendent Magazine

View our Partner links



Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2009, LawnSite.com™ - Moose River Media