Register free!

The Green Industry's Resource Center





Reply
 
Thread Tools   Display Modes
  #1  
Old 10-26-2003, 10:15 PM
DieselDeere's Avatar
DieselDeere DieselDeere is offline
LawnSite Senior Member
 
Join Date: Mar 2003
Location: Midwest
Posts: 411
Catchers For Lazers

What baggers are available for a eXmark Lazer Z 52" Ultra Cut deck? How much are they? Are their some sort of screens available to further filter dust? How much?
Reply With Quote
  #2  
Old 10-27-2003, 02:14 PM
PeterA's Avatar
PeterA PeterA is offline
Sponsor
 
Join Date: Jul 2001
Location: Bellevue, WA
Posts: 543
Diesel,
you can use part number GCEXXL (the 6.2 cu ft) or the GCEX (the 4.15 cu ft). List is 329.00 for the GCEX and 459.00 for the jumbo. We do have a dust cover for both. The part number is GCDust or GCDustXL. They come in 4 parts and attach to the outside of the bagger using small machine screws. Cost is 50-65 bucks depending on the dealer and what size you need.
Since you have an ultra cut deck, I would reccomend you get the 2004 model Accelerator. The distributor in Michigan (PACE) just got a bunch of these in, both in the Jumbo and regular sizes. The opening is 3/8 inch taller to optimize the fit on the Ultra cut but still retain the fit on the other exmark decks. The box is marked "Extender Ready". Ask your dealer to have pace send a unit with this marking and the performance will be slightly better than with the 2003 model catcher.

Thanks
Peter
Reply With Quote
  #3  
Old 10-27-2003, 04:04 PM
DieselDeere's Avatar
DieselDeere DieselDeere is offline
LawnSite Senior Member
 
Join Date: Mar 2003
Location: Midwest
Posts: 411
How much do each of the 04' baggers weigh?
Reply With Quote
  #4  
Old 10-27-2003, 04:08 PM
DieselDeere's Avatar
DieselDeere DieselDeere is offline
LawnSite Senior Member
 
Join Date: Mar 2003
Location: Midwest
Posts: 411
Also how does the back door open? How large is the back door opening of each?
Reply With Quote
  #5  
Old 10-27-2003, 05:20 PM
PeterA's Avatar
PeterA PeterA is offline
Sponsor
 
Join Date: Jul 2001
Location: Bellevue, WA
Posts: 543
The 04's are between 17 and 18 Lbs. for the standard, and 23-24 Lbs. for the Jumbo. The catcher empties out the back by means of a pivoting door. The door can be removed by bringing it to the vertical position and pulling it off (for emptying into buckets or over the side of a trailer).

Peter.
Reply With Quote
  #6  
Old 10-28-2003, 06:06 PM
DieselDeere's Avatar
DieselDeere DieselDeere is offline
LawnSite Senior Member
 
Join Date: Mar 2003
Location: Midwest
Posts: 411
Quote:
Originally posted by PeterA
Diesel,
The distributor in Michigan (PACE) just got a bunch of these in, both in the Jumbo and regular sizes. Thanks
Peter
Never heard of Pace, do you have a phone #?
Reply With Quote
  #7  
Old 10-28-2003, 11:33 PM
PeterA's Avatar
PeterA PeterA is offline
Sponsor
 
Join Date: Jul 2001
Location: Bellevue, WA
Posts: 543
Diesel,
The phone number for Pace is 734-453-6258. They can help you find a dealer, but will not sell to landscapers. They set up our dealers for us and keep an inventory on hand in Michigan so dealers have quick access to them. I mentioned them because your dealer may need to order one from them.
Reply With Quote
  #8  
Old 10-30-2003, 10:09 PM
DieselDeere's Avatar
DieselDeere DieselDeere is offline
LawnSite Senior Member
 
Join Date: Mar 2003
Location: Midwest
Posts: 411
How large is the opening of the back door?
Reply With Quote
  #9  
Old 10-31-2003, 10:37 PM
PeterA's Avatar
PeterA PeterA is offline
Sponsor
 
Join Date: Jul 2001
Location: Bellevue, WA
Posts: 543
The regular size is about 16*16 inches, the XL about 18*18

Peter.
Reply With Quote
  #10  
Old 10-31-2003, 10:43 PM
PeterA's Avatar
PeterA PeterA is offline
Sponsor
 
Join Date: Jul 2001
Location: Bellevue, WA
Posts: 543
Diesel,
Looking at some of your other posts, you may be thinking about putting a garbage bag over the back. Add about 1 1/2 inches to the above measurements to get the outside dimensions. there is a 3/4 angle bar frame around the back door.

Peter.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump




Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 07:07 AM.

Page generated in 0.09402 seconds with 7 queries