Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
 
 
Thread Tools Display Modes
  #1  
Old 11-03-2003, 12:06 AM
PaulJ's Avatar
PaulJ PaulJ is offline
LawnSite Bronze Member
 
Join Date: Nov 2001
Location: Columbus, NE
Posts: 1,777
48" hustler SWB gators?

Do you make a gator type blade for the 48" hustler? it is a 17" blade that is not flat. It drops down about 1/4 in on the ends. I don't know tha hole size right now. my dealer was unable to find a gator listed for this mower. Do you have anything that is close?
And how soon can you get a set to Nebraska?
__________________

Paul Arens
Columbus, NE
  #2  
Old 11-03-2003, 09:10 AM
Oregon Tech Oregon Tech is offline
Sponsor
 
Join Date: Aug 2003
Location: Kansas City Missouri
Posts: 58
It would help me a lot if you could give me the OEM number off of your old blade.
  #3  
Old 11-03-2003, 03:59 PM
PaulJ's Avatar
PaulJ PaulJ is offline
LawnSite Bronze Member
 
Join Date: Nov 2001
Location: Columbus, NE
Posts: 1,777
The number on the standard blade that came with the mower is:
XL767111

Hope that helps. Thanks
__________________

Paul Arens
Columbus, NE
  #4  
Old 11-03-2003, 04:43 PM
Oregon Tech Oregon Tech is offline
Sponsor
 
Join Date: Aug 2003
Location: Kansas City Missouri
Posts: 58
I am sorry to say that we no longer make a Gator for that application. If I can help with anything else let me know.
  #5  
Old 11-04-2003, 12:57 AM
PaulJ's Avatar
PaulJ PaulJ is offline
LawnSite Bronze Member
 
Join Date: Nov 2001
Location: Columbus, NE
Posts: 1,777
Well you should start making them again. Why would you not make them anymore? Do you have any old stock left? With Hustlers new super walkbehinds getting more and more recognition they are going to become more popular I believe. Do you make a simple flat gator that would fit? I really want to use gators on this mower. Can you suggest anything similar?
thie part number of the High lifts I got is:XL773431. does that help?
__________________

Paul Arens
Columbus, NE
  #6  
Old 11-04-2003, 06:39 AM
Doc Pete Doc Pete is offline
LawnSite Gold Member
 
Join Date: Mar 2002
Location: New Jersey
Posts: 3,469
Re: 48" hustler SWB gators?

Quote:
Originally posted by PaulJ
Do you make a gator type blade for the 48" hustler? it is a 17" blade that is not flat. It drops down about 1/4 in on the ends. I don't know tha hole size right now. my dealer was unable to find a gator listed for this mower. Do you have anything that is close?
And how soon can you get a set to Nebraska?
Paul,
Did you check with Hustler? I could swear the factory has them. If I have a chance I'll ask....
Pete
  #7  
Old 11-04-2003, 08:42 AM
Oregon Tech Oregon Tech is offline
Sponsor
 
Join Date: Aug 2003
Location: Kansas City Missouri
Posts: 58
I am sorry. I do not have anything to offer at this time. I don't know for sure why we do not offer it any more. It is more than likely due to the low volumes we had on that item.
  #8  
Old 11-04-2003, 09:54 AM
PaulJ's Avatar
PaulJ PaulJ is offline
LawnSite Bronze Member
 
Join Date: Nov 2001
Location: Columbus, NE
Posts: 1,777
I double checked the size. It's a 17 inch blade with a 1/2 in hole. the width isn't as critical to me because I want to use them as part of doubles.

)
__________________

Paul Arens
Columbus, NE
  #9  
Old 11-04-2003, 12:00 PM
Oregon Tech Oregon Tech is offline
Sponsor
 
Join Date: Aug 2003
Location: Kansas City Missouri
Posts: 58
The only thing that we offer close enough to help you is a
99-917. This is 16-15/16" blade with a 1/2" hole. I believe that you said you were from Nebraska. If you will contact Midwest Engine Warehouse in Omaha they will help you. Their number is 1-800-683-2424. Be carefull, since this is not a direct application you will need to make sure that everything will clear the deck.
  #10  
Old 11-22-2003, 08:02 PM
PaulJ's Avatar
PaulJ PaulJ is offline
LawnSite Bronze Member
 
Join Date: Nov 2001
Location: Columbus, NE
Posts: 1,777
What mower are those blades made for? Someone mentioned they were using blades for a Bobcat on their Hustler, but I don't remember the size. Are they a flat blade or do they have the dropped ends? The length is probably close enough to work.
Thanks
__________________

Paul Arens
Columbus, NE
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 03:00 AM.

Page generated in 0.09652 seconds with 7 queries