Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 02-27-2004, 11:24 PM
smokymoose's Avatar
smokymoose smokymoose is offline
LawnSite Member
 
Join Date: Sep 2003
Location: Acworth Ga 30101
Posts: 16
Clutches

I have pulled a clutch of my mower that is a closed design, the lead wires are sheared and I need to replace the clutch. I am wanting to find a more pratical design to replace this. Since I am Fairly new to this game what information is needed to seek a replacement, since the dealer is of no help where can I find models to replace it, any web sites or names will be greatly appreciated. Thanks Josh
Reply With Quote
  #2  
Old 02-28-2004, 08:03 AM
ducky1 ducky1 is offline
LawnSite Senior Member
 
Join Date: Oct 2002
Location: s.e. Kansas
Posts: 252
Probably not much you can do about changing the style of clutch you have without a whole lot of design changes. Elect. clutches dont go bad too often unless something else causes it to do so.
what kind of equipment are you having trouble with?
__________________
ducky
Reply With Quote
  #3  
Old 02-28-2004, 09:45 AM
smokymoose's Avatar
smokymoose smokymoose is offline
LawnSite Member
 
Join Date: Sep 2003
Location: Acworth Ga 30101
Posts: 16
It is a Country Clipper Jazee, It's a homeowner version that is getting beat-up in my part-time gig. I was looking to change the type of clucth so this wouldn't happen again. Do you know of places to get clutches at a cheaper price than through a dealer?
Thanks Josh.
Reply With Quote
  #4  
Old 02-28-2004, 12:13 PM
rvrdvr rvrdvr is offline
LawnSite Member
 
Join Date: Feb 2004
Location: iowa
Posts: 22
I can get you a part number if you want to try giving shivvers(maker of country clippers) a call and see if they will send you one.
Reply With Quote
  #5  
Old 02-28-2004, 06:04 PM
ducky1 ducky1 is offline
LawnSite Senior Member
 
Join Date: Oct 2002
Location: s.e. Kansas
Posts: 252
Try J Thomas. It seems like they have elect. clutches kind of cheap. They are all expensive.
__________________
ducky
Reply With Quote
  #6  
Old 03-01-2004, 11:40 AM
eddies's Avatar
eddies eddies is offline
LawnSite Member
 
Join Date: Jan 2004
Location: southeast texas
Posts: 16
See if it has a Warner number on it and maybe I have one or can tell where to get one. Also need to figure out why the wires pulled out, did the mount break that keeps it from spinning when its engaged?
Reply With Quote
  #7  
Old 03-01-2004, 07:54 PM
smokymoose's Avatar
smokymoose smokymoose is offline
LawnSite Member
 
Join Date: Sep 2003
Location: Acworth Ga 30101
Posts: 16
Thanks to all of you for the replies,

Eddies, I have a Warner 5219-22 loos like it was made in June 24, 2002. The wires have sheared at the plastic. There doesn't appear to be any pulling, but I would like to know more about the mount. This clutch attaches to a rod with just a bolt. The wires run up through the frame and attach to a switch behind the seat. I suspect the unprotected under-belly of this machine is the culprit. If you can let me know about the clutch I sure would be obliged. Thanks, Josh
Reply With Quote
  #8  
Old 03-02-2004, 09:54 AM
eddies's Avatar
eddies eddies is offline
LawnSite Member
 
Join Date: Jan 2004
Location: southeast texas
Posts: 16
My book dont show that number, give me the model and serial number and I will see what I come up with... It shows a 5218-26?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:59 AM.

Page generated in 0.08358 seconds with 7 queries