Advanced Search

The Green Industry's Resource Center

Old 12-13-2000, 10:36 PM
Psyclopse Psyclopse is offline
LawnSite Member
Join Date: Dec 2000
Location: In
Posts: 118
I have an '89 S-10 with the 4 cylinder motor. I just bought this truck a few months ago. The owner told me that it would run rough and bog, like it is towing a heavy load, then all of a sudden it would straiten out and run good. He said he was sure that the cat was plugged up.

I noticed that it runs rough every time you take off from a stop, but then the "check engine light" comes on. Once the light comes on it runs fine. Occasionally at highway speeds it will start to act up- at which point the light goes out. As long as the light is on, it runs good.

Well, the first thing I did (and I know it's wrong) was replace the cat with a strait-pipe. The situation did not change. After talking to a few people, the general opinion was that the O2 sensor was the culprit. When I ckecked the sensor, the wire was completely seperated from the sensor. I thought "good, I found the problem." So, I went out and got a new sensor. The situation still remains unchanged.

Well, now after a month of dealing with it, it is running rougher than ever. It won't idle on it's own and the RPM's are very low when it is trying to idle. While driving, it is very rough, and it spits and sputters like it's running out of gas. When I come to a stop, it dies. It does start back up easily, but it is hard to try to keep it from dying on ice-covered roads with a manual tranny.

Any ideas on what to look at next?
1988 GMC Sierra 3500 4x4, 1987 Chevy 3/4 ton 4x4
1981 Ford F350 4x4, 1989 GMC S-15
Reply With Quote
Old 12-14-2000, 02:41 AM
Fierospeeder Fierospeeder is offline
LawnSite Member
Join Date: Nov 2000
Posts: 51
try checking your EGR valve, its a circular shaped on the engine.

It looks like a UFO with a vacuum tube coming out of it, and usually located on the intake side.
If you have the 2.5L four cylinder, its not that bad to remove.

One way of testing it is to stick your fingers and see when you press the inside up, it should come back down.

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 05:42 PM.

Page generated in 0.05953 seconds with 8 queries