Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather


Reply
 
Thread Tools Display Modes
  #1  
Old 08-05-2004, 09:55 PM
BSDeality's Avatar
BSDeality BSDeality is offline
LawnSite Silver Member
 
Join Date: May 2003
Location: Fairfield County, CT
Posts: 2,851
Gravely 260Z

are there any plans on getting a bagger setup for a Gravely 260Z (2004) ? With the fall soon approaching I'd like to have a bagger for my new machine.

If you don't have any plans i'd be happy to work with you to get you dimensions and all that fun stuff.

Thanks
__________________
Matt
Efficiency = Profit
Reply With Quote
  #2  
Old 08-06-2004, 03:36 AM
PeterA's Avatar
PeterA PeterA is offline
Sponsor
 
Join Date: Jul 2001
Location: Bellevue, WA
Posts: 543
Is this a 60 inch deck? If it is a pro G or pro H deck the GCGR or GCGRXL will fit. If we don't have a fitup for your mower, we may be able to do a custom fitup for you. Call me at the office or email and I will try to get you taken care of!
__________________

Peter Andonian, Lawnsite Sponsor
Accelerator Industries
http://www.AcceleratorIndustries.com
800-984-9410
Reply With Quote
  #3  
Old 08-07-2004, 12:46 AM
BSDeality's Avatar
BSDeality BSDeality is offline
LawnSite Silver Member
 
Join Date: May 2003
Location: Fairfield County, CT
Posts: 2,851
it is a 60" deck. I'm not sure if it has the same deck as the WB's. it has the "air-flo" deck.
__________________
Matt
Efficiency = Profit
Reply With Quote
  #4  
Old 08-07-2004, 07:19 PM
PeterA's Avatar
PeterA PeterA is offline
Sponsor
 
Join Date: Jul 2001
Location: Bellevue, WA
Posts: 543
Could you post a picture of the discharge area of the mower? also a few measurements of the opening would help. The pro G and Pro H have an opening that is about 15 inches long and 5 1/4 tall.
__________________

Peter Andonian, Lawnsite Sponsor
Accelerator Industries
http://www.AcceleratorIndustries.com
800-984-9410
Reply With Quote
  #5  
Old 08-11-2004, 06:19 PM
BSDeality's Avatar
BSDeality BSDeality is offline
LawnSite Silver Member
 
Join Date: May 2003
Location: Fairfield County, CT
Posts: 2,851
sorry about the delay peter. its been a rough weekend and busy start to the week. here are the pictures and dimensions. I'll try to illustrate them as well as possible.

Dimensions:

A - A : 22+1/8"
B - B : 4.5"
C - C : 2+7/16"
__________________
Matt
Efficiency = Profit
Reply With Quote
  #6  
Old 08-11-2004, 06:20 PM
BSDeality's Avatar
BSDeality BSDeality is offline
LawnSite Silver Member
 
Join Date: May 2003
Location: Fairfield County, CT
Posts: 2,851
der... a picture is worth a thousand words.....
Attached Images
 
__________________
Matt
Efficiency = Profit
Reply With Quote
  #7  
Old 08-11-2004, 06:28 PM
BSDeality's Avatar
BSDeality BSDeality is offline
LawnSite Silver Member
 
Join Date: May 2003
Location: Fairfield County, CT
Posts: 2,851
here's another view of b and c

d is 1+9/16".
the thickness of the vertical plate is 3/16"


also, in the first picture you can almost see how the deck tapers back in the front. If you were looking straight down at the vertical plate the length of "A" would be 22+1/2". since the deck tapers the length "A" @ the discharge is 22+1/8"

Let me know if you need a picture of that or if you can visualize it.
Attached Images
 
__________________
Matt
Efficiency = Profit
Reply With Quote
  #8  
Old 08-12-2004, 12:32 AM
PeterA's Avatar
PeterA PeterA is offline
Sponsor
 
Join Date: Jul 2001
Location: Bellevue, WA
Posts: 543
Thanks for all the nice pics. I think we could do a catcher for this pretty easily. I can't quite tell from the pictures if the opening is flush- ie. if you put a flat board against the opening would it close it off or would there be gaps? It looks like there might be a small gap at the front below the blade, but that would not be a problem. Call me if you want us to make you a catcher for this mower.
PS- I will be gone on vacation next week.
__________________

Peter Andonian, Lawnsite Sponsor
Accelerator Industries
http://www.AcceleratorIndustries.com
800-984-9410
Reply With Quote
  #9  
Old 08-12-2004, 07:43 AM
BSDeality's Avatar
BSDeality BSDeality is offline
LawnSite Silver Member
 
Join Date: May 2003
Location: Fairfield County, CT
Posts: 2,851
it does have a gap at the bottom just below the blade. the gap is present on the front and rear vertical walls of the deck.. I'll get that measurement for you today.

I think i would like a catcher made
__________________
Matt
Efficiency = Profit
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump




Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:25 PM.

Page generated in 0.09652 seconds with 8 queries