Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 08-30-2004, 05:41 PM
bobcatnj bobcatnj is offline
LawnSite Senior Member
 
Join Date: Feb 2004
Location: flemington,NJ
Posts: 686
pull chords

my pull chord broke on my 48in bobcat. i got a new chord for it but i cant get the chord to wind up all the way. it only goes maybe one time around. anyone ahve any tips/hints on an easy, less stressful way to do this???
Reply With Quote
  #2  
Old 08-30-2004, 06:06 PM
CamLand's Avatar
CamLand CamLand is offline
LawnSite Bronze Member
 
Join Date: Dec 2002
Location: One Lawn After Another
Posts: 1,307
Less stress would be to have your mower shop rewind for you...
Reply With Quote
  #3  
Old 08-30-2004, 06:18 PM
Aproct Aproct is offline
LawnSite Member
 
Join Date: Nov 2003
Location: New Jersey
Posts: 73
I kinda learned from experience. If you are ever out in the field away from your shop, this might help you in a bind. Take the pull cover off the motor. Be careful and let the spring full go. In the pulley, there should be a notch, pull the rope in the notch and start rewinding the spring wil still in the cage. Kinda like pre-stringing a reserve trimmer spool. Then when you feel you have enough tension on the spring, pull the rope out of the notch and let is pull the rope in. Hope this helps.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:19 PM.

Page generated in 0.07363 seconds with 7 queries