Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 11-02-2004, 06:51 AM
mcambrose mcambrose is offline
LawnSite Senior Member
 
Join Date: Jan 2000
Location: Florence, AL
Posts: 483
Shindaiwa EB 630 has oil buildup on fuel tank

My EB630 blower has a lot of oil buildup on the gas tank. I took the rope pull mechanism off and noticed that there was some oil in there also. Is is likely leaking at the crankshaft seal? If yes, how do I change it? Is this a common problem. (3 yrs old)

Thanks for any help.
__________________
2-Walker 20 HP GHS, 1-Walker 26 hp GHS, 1-Walker 23 hp GHS, 42 and 48 GHS decks, 42 mulch deck, 42 discharge deck, 3-Honda WB, 3 Shind Trimmers, Stihl BR600 blower, Shind 260 edger, Two Shind Multi-tool with artic. clippers and chainsaw, Redmax 8000 blower, Redmax 7001 blower, Shind 803 Blower, Spyker walk spreader, sprayer for Walker mower, 3-Stihl chainsaws.
Reply With Quote
  #2  
Old 11-03-2004, 05:46 AM
Travis Followell's Avatar
Travis Followell Travis Followell is offline
LawnSite Silver Member
 
Join Date: Sep 2004
Location: KY
Posts: 2,207
It probobly is leaking from the crankshaft seal. We have an FS 85 Stihl that leaks from the front seal and it leaks so bad it can't be used because it blows oil all over you pants. The seal would be pretty hard to replace. If its not leaking very bad then I wouldn't worry about it but if you want to replace it just take it to the dealer.
Reply With Quote
  #3  
Old 11-03-2004, 12:28 PM
Joe B J's Avatar
Joe B J Joe B J is offline
LawnSite Member
 
Join Date: Mar 2004
Location: Alabama
Posts: 37
What ratio are you mixing you fuel/oil ? It sounds like you are over oiling, or running an extremely rich carb. mixture.
Reply With Quote
  #4  
Old 11-03-2004, 01:31 PM
vipermanz's Avatar
vipermanz vipermanz is offline
LawnSite Bronze Member
 
Join Date: Mar 2001
Location: Birmingham Alabama
Posts: 1,780
that seal is going to take quite a bit of effort, try putting some instant gasket on the starter rope case's edges if you want it sealed. might not be a good idea though as it would eventually soak the rope..
__________________
<img src="http://img.photobucket.com/albums/v404/vipermanz/Newbanner.jpg" alt="Image hosted by Photobucket.com">
Check Out Weldingweb !!!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 04:45 AM.

Page generated in 0.08243 seconds with 9 queries