Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #11  
Old 12-07-2004, 08:27 AM
mpm32 mpm32 is offline
LawnSite Member
 
Join Date: Oct 2004
Location: Southbury, CT
Posts: 69
Where should the fluid level be at in the tank? I have a scag sthm and I have the manual and it doesn't say where the level should be at. There is a filler tube that goes into the tank, should the level come to the bottom of the tube?
Reply With Quote
  #12  
Old 12-08-2004, 06:40 PM
Joe B J's Avatar
Joe B J Joe B J is offline
LawnSite Member
 
Join Date: Mar 2004
Location: Alabama
Posts: 37
I am not sure of your exact model. Most I have seen either have a sight glass in the side of tank, baffle, or dip stick. The fluid should just reach the top of the baffle inside the tank, the baffle is 'shorter' than the tank itself. With the glass, level should be halfway of the glass...you might want to check your filler cap to make sure the dipstick wasn't broken off if it did in fact have one.
Reply With Quote
  #13  
Old 12-09-2004, 02:46 PM
mpm32 mpm32 is offline
LawnSite Member
 
Join Date: Oct 2004
Location: Southbury, CT
Posts: 69
No sight glass, no mark that I can see, and the manual just shows the cap with no dipstick and the filler neck insert, which is just a tube with a flange that goes into the tank.
Reply With Quote
  #14  
Old 12-09-2004, 05:22 PM
Travis Followell's Avatar
Travis Followell Travis Followell is offline
LawnSite Silver Member
 
Join Date: Sep 2004
Location: KY
Posts: 2,207
The manual should tell you how to check the oil level.
Reply With Quote
  #15  
Old 12-13-2004, 08:47 PM
ed2hess's Avatar
ed2hess ed2hess is offline
LawnSite Fanatic
 
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 11,564
I would go deeper into the hydro than just changing oil! I would try to check whether the drive wheel bearing are in good shape. Check for any leaking of oil by the bearing, that might inidicate a wear situation. If you replace the bearing before it messes up the shaft the cost is minimal.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:43 PM.

Page generated in 0.07381 seconds with 7 queries