Register free!

The Green Industry's Resource Center



View Poll Results: How would you build an inexpensive mulchspreader
How wide and how long should it be? 1 50.00%
What options would you want on this equipment 1 50.00%
What would you pay for this maulcher 1 50.00%
Would you be willing to assemble it? 2 100.00%
Multiple Choice Poll. Voters: 2. You may not vote on this poll

Reply
 
Thread Tools   Display Modes
  #1  
Old 01-05-2005, 09:13 PM
bubenberg bubenberg is offline
LawnSite Member
 
Join Date: Feb 2000
Location: Bucks County, Pennsylvania
Posts: 76
How would you want your Mulch spreader to look like?

I built a mulch spreader and am not too happy with the spreading results. Some of the mulch ends up falling into the grass area (3-4 inches wide). The intend is to reduce manpower ($) but we loose too much time moving the spilt mulch into the bed. It is basically a small manure spreader (mounted sideways) that can hold between 1000 to 1800 and can be moved by a 20 horsepower lawn/garden tractor.

What, if you could build something in the $2000.00 range, would you want this mulcher to do to save you labor expenses?
__________________
Topdressing Machine improvements Power Trac, Acrease Wing mowers addict
Reply With Quote
  #2  
Old 01-10-2005, 02:24 PM
bubenberg bubenberg is offline
LawnSite Member
 
Join Date: Feb 2000
Location: Bucks County, Pennsylvania
Posts: 76
Great Idea

BigEddy, form Ontario, Canada made the following contribution and at that a brilliant one:

Okay - if the blower / suction solution isn't what you are looking for, how about modelling it after a slinger truck?

Conveyor belt extending out 10' say, from a V Shaped hopper that mounts in place of the bucket. Using a pivot mechanism, you can get some sideways travel, or with the PT articulation you can also "turn" the belt to another spot.

Assuming you have hyro flow to the front, I'd use a hydraulic motor to drive the belt. Drive forward until the end of the conveyor is over the flower bed, engage the conveyor and "sling" some mulch onto the bed. Pivot the PT or move forward and back to distribute.

Or for better control, mount a remote valve at the end of a pivoting conveyor, then get off the seat (ugh) and stand at the conveyor, and control the position and flow from there.
__________________
Topdressing Machine improvements Power Trac, Acrease Wing mowers addict
Reply With Quote
  #3  
Old 01-10-2005, 02:26 PM
bubenberg bubenberg is offline
LawnSite Member
 
Join Date: Feb 2000
Location: Bucks County, Pennsylvania
Posts: 76
My Reply Was

Fantastic Some great thinking is going on this here Monday. Thank you very much for your contributions

What do you mean leave the perfectly good environment of the Rops environment of the Power Trac?

Do you think one could reverse the process and have the mulch move backwards (toward the driver) for better visibility and the control similar to the portable dumper controller?
__________________
Topdressing Machine improvements Power Trac, Acrease Wing mowers addict
Reply With Quote
  #4  
Old 01-10-2005, 02:30 PM
bubenberg bubenberg is offline
LawnSite Member
 
Join Date: Feb 2000
Location: Bucks County, Pennsylvania
Posts: 76
Found this while looking for a motorcyle hitch

This motorcycle hitch manufacturer has an interesting concept of scooping and spreading material:

http://www.sandpiperspreader.com/

do you guys think that could be converted for our Ultimate mulcher?
__________________
Topdressing Machine improvements Power Trac, Acrease Wing mowers addict
Reply With Quote
  #5  
Old 01-10-2005, 02:39 PM
bubenberg bubenberg is offline
LawnSite Member
 
Join Date: Feb 2000
Location: Bucks County, Pennsylvania
Posts: 76
Attachment type version of a mulcher

This could be converted to our needs. How would you like that next spring in your mulching crew?

Side Discharge bucket
__________________
Topdressing Machine improvements Power Trac, Acrease Wing mowers addict
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:52 AM.

Page generated in 0.08516 seconds with 8 queries