Securing Equipment

[rodfather]

For those with enclosed trailers, how/what do you do to hold down your mowers? We're getting one next month and although it has 4 or so D-rings mounted in the floor, I was wondering if anything else will be needed.

Any information would be greatly appreciated...thanks!

[dobehap]

Mower's parking brake. Rarely moves around.

[Henry]

We put some d-rings on the walls of the trailer. Have you seen e-tracks?

[rodfather]

Originally Posted by Henry

We put some d-rings on the walls of the trailer. Have you seen e-tracks?

E-tracks? Never heard of them.

[Carolina Cutter]

I made some small brackets out of angle iron and mounted two on each side of the trailer and then cut some 2x4's to fit the width and drop them into the brackets. Front and rear of mowers and equipment.....keeps the mower right where I left it and easy to remove and replace.

[CamLand]

Originally Posted by rodfather

E-tracks? Never heard of them.

Check on Ebay,bunch of diffrent kinds...

[rodfather]

Originally Posted by merlin

I made some small brackets out of angle iron and mounted two on each side of the trailer and then cut some 2x4's to fit the width and drop them into the brackets. Front and rear of mowers and equipment.....keeps the mower right where I left it and easy to remove and replace.

Jeff, I went to your website and thought maybe I might see something from your pics...no luck. Can ya take any closeups and post them for me?

[Carolina Cutter]

Was taking care of that as we speak.....did the best I could so that you could see what I was talking about.....

[Carolina Cutter]

Here's another view.................

THis one is in the previous thread....tried renaming it but no go.....hmmmmm


Try this

[rodfather]

Originally Posted by merlin

Was taking care of that as we speak.....did the best I could so that you could see what I was talking about.....

Are the 2x4's easily removable to back mowers in and out?