Register free!

The Green Industry's Resource Center





Reply
 
Thread Tools   Display Modes
  #1  
Old 03-12-2005, 11:55 PM
apexlawn03 apexlawn03 is offline
LawnSite Member
 
Join Date: Feb 2005
Location: Upstate N.Y. Southern teir
Posts: 105
Wanted Grass Catcher for Sarlo

I was wondering if you made contact with Sarlo about grass catcher? If not what would one cost custom made for my sarlo? What measurements are needed thank you.
Reply With Quote
  #2  
Old 03-13-2005, 03:51 PM
PeterA's Avatar
PeterA PeterA is offline
Sponsor
 
Join Date: Jul 2001
Location: Bellevue, WA
Posts: 543
I did call Sarlo. They are looking at our catcher but my experience is that these things often take quite a while to actually work out. Give me a call with the measurements of your mower opening. Also, if you could send or post a picture of the opening on your mower that would be helpful. As long as we can use a standard 3.3 cu ft. catcher body (what we use for the sutech mower) It should not be too difficult to make a hookup for your mower.
__________________

Peter Andonian, Lawnsite Sponsor
Accelerator Industries
http://www.AcceleratorIndustries.com
800-984-9410
Reply With Quote
  #3  
Old 03-13-2005, 08:38 PM
apexlawn03 apexlawn03 is offline
LawnSite Member
 
Join Date: Feb 2005
Location: Upstate N.Y. Southern teir
Posts: 105
Sarlo reply Thanks Peter

Thanks again Peter, I am off to work my fulltime job until wed. I will try to call you and try to put picture on line or email not to sure how to do but will give you a call wed or thursday thanks again.
Reply With Quote
  #4  
Old 03-19-2005, 10:55 PM
apexlawn03 apexlawn03 is offline
LawnSite Member
 
Join Date: Feb 2005
Location: Upstate N.Y. Southern teir
Posts: 105
pictures of sarlo

hope pictures got sent and or posted
Attached Images
         
Reply With Quote
  #5  
Old 03-19-2005, 11:02 PM
apexlawn03 apexlawn03 is offline
LawnSite Member
 
Join Date: Feb 2005
Location: Upstate N.Y. Southern teir
Posts: 105
more pictures of sarlo mower

hope pictures help ithink I got it.
Attached Images
         
Reply With Quote
  #6  
Old 03-19-2005, 11:15 PM
apexlawn03 apexlawn03 is offline
LawnSite Member
 
Join Date: Feb 2005
Location: Upstate N.Y. Southern teir
Posts: 105
pictures of sarlo mower

It looked like it worked
Reply With Quote
  #7  
Old 03-20-2005, 02:49 AM
PeterA's Avatar
PeterA PeterA is offline
Sponsor
 
Join Date: Jul 2001
Location: Bellevue, WA
Posts: 543
Apex,
Thanks for the pictures. We should be able to do a catcher for this mower easily. I do need one more measurement- how high is the opening? It looks from the pictures like it is about 5 inches.
Call me monday and I will arrange to get you a catcher.
__________________

Peter Andonian, Lawnsite Sponsor
Accelerator Industries
http://www.AcceleratorIndustries.com
800-984-9410
Reply With Quote
  #8  
Old 03-22-2005, 07:04 PM
apexlawn03 apexlawn03 is offline
LawnSite Member
 
Join Date: Feb 2005
Location: Upstate N.Y. Southern teir
Posts: 105
sarlo mower discharge height

The measurement is in center top to bottom is approx (4 and 1/4 inch ) It was from bottom of metal rail/ bar to top of deck. Do you think that metal bar across the dishcharge opening will be a problem with grass catching on bar?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump




Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:57 AM.

Page generated in 0.09319 seconds with 8 queries