02 International 4300

Discussion in 'Marketplace' started by bonerigo.1, Oct 15, 2008.

  1. bonerigo.1

    bonerigo.1 LawnSite Member
    Posts: 119

    This truck has a little over 83,000 miles with a DT-466. 6 speed eaton fuller with lots of clutch life left. New brakes with everything that comes with it, new axle houseing, new wheel bearings, new wheel seals. Overall the truck is a 9 out of 10.
    (937) 925-5199 Simon Bonerigo

    memory card 519 Large Web view.jpg

    memory card 525 Large Web view.jpg

    memory card 526 Large Web view.jpg

    memory card 530 Large Web view.jpg

    memory card 531 Large Web view.jpg
     
  2. bonerigo.1

    bonerigo.1 LawnSite Member
    Posts: 119

    Forgot to mention, 12 pto driven dump bed.
    Asking 29,995 OBO.
     
  3. very very nice truck.
     
  4. bonerigo.1

    bonerigo.1 LawnSite Member
    Posts: 119

    Thank you. Its under CDL and will haul anything and everything you need.
     
  5. bonerigo.1

    bonerigo.1 LawnSite Member
    Posts: 119

    Comes with a full tank of diesel!!!
     
  6. bonerigo.1

    bonerigo.1 LawnSite Member
    Posts: 119

    bump.....................!!
     
  7. bonerigo.1

    bonerigo.1 LawnSite Member
    Posts: 119

    Think of everything you could do with this truck.
     
  8. bonerigo.1

    bonerigo.1 LawnSite Member
    Posts: 119

    27,000...........
     
  9. LawnsRUsInc.

    LawnsRUsInc. LawnSite Senior Member
    from midwest
    Posts: 916

    I am intrested does it have a pto off the trans or pump off the engine?
     
  10. bonerigo.1

    bonerigo.1 LawnSite Member
    Posts: 119

    The pto is off the trans. It is engaged when the pto is engaged and clutch is released. This truck was used for five different patio jobs this year. All required concrete removal and all jobs were rather large. We were able to dump any and all loads with no problem. The hitch plate on the back was welded before we bought the truck. We never thought it was strong enough so we are going to replace it. We have a plate of 1" thick by 3'x3' wide steel. The plate will be welded before the buyer purchases unless you want to do it yourself.
     

Share This Page