03 Exmark specs contradict each other

Discussion in 'eXmark' started by dannyc33, Aug 30, 2003.

  1. dannyc33

    dannyc33 LawnSite Member
    from indy
    Posts: 95

    I would like to know some specs for 03 60"and 72" Lazer Z's and Lazer Z LC's. The Exmark brochure has different specs from the Exmark website. Again I'ld like to know the following specs for 60" and 72' Z's and Z LC's

    1. What are their top speed/mowing speed?
    2. What is their lenght (including deck)?
    3. How much do they weigh?

    Any help would be greatly appreciated since the difference from the brochure and website differ quite a bit.

    Dan
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Dan,

    Thanks for the post.

    Ground speed is identical on the liquid cooled and air cooled Lazer Z's at 10 mph.

    60" Lazer air cooled
    Weight = 1053 Length = 78.5
    72" Lazer air cooled
    Weight = 1126 Length = 82.5

    60" Lazer Liquid cooled
    Weight = 1316 Length = 80.7

    72" Liquid cooled
    Weight = 1321 Length = 84.8

    Let me know if I can be of any further assistance.

    Thanks

    Terry


    __________________
     
  3. dannyc33

    dannyc33 LawnSite Member
    from indy
    Posts: 95

    Terry,
    Thanks, you typed the weight twice, not the lenght for the air cooled.
    Also what are the tire to tire widths (outside) on each?

    Thanks,
    Dan
     
  4. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Dan

    OOOPs. That should look a little better.

    Tire to tire width is 53.5" for the 60" and 57.3" for the 72" units.

    That sounds like something we should put on our website in the tech specs.

    Thanks

    Terry
     
  5. dannyc33

    dannyc33 LawnSite Member
    from indy
    Posts: 95

    sorry, once last thing.
    How much does the deck on the 60 and 72 overhang on each side?

    Dan
     
  6. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Dan,

    The 60" has about 3.5" and the 72" has bout 11.5" due to the offset of the deck. It really depends upon how you measure but that should be with in .5" or so.

    Thanks

    Terry
     

Share This Page