17 kaw motor

Discussion in 'eXmark' started by Drew Gemma, May 23, 2006.

  1. Drew Gemma

    Drew Gemma LawnSite Bronze Member
    Posts: 1,510

    I have a turf tracer hydro walk behind the 17hp kaw is burning oil the rest of the mower is bullet proof. Can I upgrade to a 19 kaw with no modifications just bolt in and go?

    Only other problem the right ecs grip hangs up sometimes I can't find the point where it is hanging up? Any tips suggestions help would be great.
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Hello Drew,
    The 19 hp Kawi will line up with the 17 hp bolt pattern.
    To help alleviate the ECS from sticking, first loosen the flange bearing bolts. Grip and release the control handle a few times, creating clearance and then retighten the flange bearing bolts. I hope this helps.

Share This Page