2-stage sanders

Discussion in '<a href=http://www.plowsite.com target=_blank ?>Sn' started by snow, Jan 2, 2000.

  1. snow

    snow Guest
    Posts: 0

    What 2-stage sander brands do you like? Which ones do you think are better ? also, is it hard or worth it to add lights to the back of them?<p>Bryan<br>http://www.snowplow.web.com
     
  2. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    Do you mean two stage tailgate models? Or V box spreaders? I have 4 v-box spreaders in total, all have the pre-wet system. If you didn't know this Meyer owns diamons and swenson, which means a meyer spreader is really a swenson and a diamond spreder is a swenson. Anyways i have two diamond spreaders ( 2.0 yards)on my f 350 dump bodies, 1 swenson 4.5 yard on my f 550, and one 6 yard or my f 650. Swenson also makes spreaders that go under the tailgates of one ton dumpbodies, and replace the taigates on one ton dump bodies. I might buy a replacement tailgate model this winter if we ever get any snow. As for the lights on the back of the spreader it depends on the truck the spreader is in, if its in a pickup ya can get away with out lights. If its in a dump body, I would want to have lights. Only i know guys that have no lights and do fine. All my back up lights are wired so they come on automaticly, and when the spreader is spreading sand, the lights come on, no switches. <p>Geoff
     
  3. bill

    bill LawnSite Member
    from chicago
    Posts: 19

    Bryan: I think the western pro flow 2 is <br>a nice unit. It either has a hitch or truss<br>bed mount. Go to western snowplows, spreaders<br>internet page and look at it.<br>I think trynx international has a nice<br>one two?<br>bill<br>galaxie72@msn.com
     
  4. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    I can't tell you what spreader is better, because i only own one brand, that just happens to be avaible in two different colors under 3 different manufactures names. Anyways i have had good luck with my diamond/swenson/meyer brand spreaders. I have heard the downeaster spreaders are good. I would stay away from airflow and hiway, although i only know a few guys with them. I don't belive that it is worth the extra money for the stainless steal models.<p>Geoff
     
  5. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    Bryan when you buy a spreader, tell me which one and i will tell you the best way to add lights too it. Adding lights isn't hard, it is adding them in away that the connections are good, and will not fail. It helps when by brother is an electical engineer. He can wire almost anything, and every time he does it looks like factory wiring. It may cost a little more to do it his way, only his connections have never failed.<p>Geoff
     
  6. plowking35

    plowking35 LawnSite Bronze Member
    from S.E. CT
    Posts: 1,687

    Byran I wouldnt worry about any of this until you get your drivers licence.<br>Geoff, I have an airflow sander that I bought used this year, I think it is a 91 or 92 and it works fine, so I dont know what you heard, but dont believe it. Like I posted before, all smaller units are essentially the same, and they all cost about the same. As far as extra lights go, I dont know what he is referring to.<br>If it is work lights, this is what I do.<br>On my dump I have 2 lights that come on with my B/U lights. The tap is inside the light ubit itself on the truck so it is a weather tight connection, and I have a two pole quick connect on the sander and the truck.<br>I also have a work light that comes on when the clutch is engaged on the spreader.<br>As far as extra stop and turn lights are conncerned I would only add them if my vehicle lights were blocked.<br>As a side note, I add a piece of angle iron to the bottom of the spreader perpindicular to the apron chain channel and hang two mud flaps to keep sand from being slung under the truck.<br>We also were going to add prewet systems this year, but went to a coated sand/salt and found that it is much more cost effective and less equip to operate. And at the rate of about 1$ per gallon for materail, coated at the rate of 8 gallons per ton, it is very cost effective.<br>Dino <p>----------<br> Professional Ice and Snow Management <br>Products:Services:Equipment www.sima.org
     
  7. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    Glad to hear good things about your air-flow. Like i said i hadn't heard much about them, but the little i did, wasn't good.<p>Geoff
     
  8. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    I think mainer's are a little behind in the sand/ salt technology. I have never heard of sand/salt that is coated, so i have used the pre-wet system. <p>I think bryan is refering two work lights, and back up lights. Dino your setup sounds a lot like mine, only by brother did the connections a lot different. I also have two work lights with orange lens, that have a alternating flash.<p>Geoff
     
  9. plowking35

    plowking35 LawnSite Bronze Member
    from S.E. CT
    Posts: 1,687

    i have a 3 head strobe system on my truck. Two ovals in the rear and a single strobe on top. It has two settings, high for day and low for night. Adds alot of visibility to the truck.<br>Geoff with an outfit like yours you should look into becoming a distributer for this product. You can coat other peoples piles and sell to other contractors, and make evn more $$$. <br>E-mail me for info. I have no personal gain from this, only the wish to help fellow contractors.(that was put in for the moderator so I dont get in trouble)<br>Dino <p>----------<br> Professional Ice and Snow Management <br>Products:Services:Equipment www.sima.org
     
  10. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    Right now i am buying all my sand and salt from an near by contractor. The reason is, i don't have any indoor storage space for the sand or salt, and i don't have anything on site enough to load it. I bought the pre-wet systems on my truck because the dealer sold them at a good price. He bought a ton of them, and hasn't been able to sell many. I don't use my pre-wet system that much because most customers are just want sand. I will pre-wet on some accounts to do a better job, only i don't get paid extra for the service. Only when i do my bid, i bid higher on the sand/salt cost to cover the pre-wet. I use the pre-wet on crossroads, busy parking lots, hills, and curves. <p>Geoff
     

Share This Page