20 hp Onan carb spring

Discussion in 'Mechanic and Repair' started by pappi84, May 15, 2008.

  1. pappi84

    pappi84 LawnSite Member
    Posts: 2

    I recently had a friend drop off to old mowers that didn't run told him I would make one. After alot of work I was able to assembly one engine but for the life of me can't remeber how the springs on the carb. and the springs on the front the ones that go on the bracket attached the the shaft that runs into the timing cover go on. any pictures of one
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,022

    Pappi,

    Can you post ALL the numbers off this engine ?

    That would be much eiaser than playing the guessing game.
     
  3. pappi84

    pappi84 LawnSite Member
    Posts: 2

    Sorry took so long left engine at work. Hard to make out the on the tag. looks like model number and spec P218G/I111-4D. Serial number H933068741
     
  4. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,022

    Well pappi,

    Looks like there are a couple variations of controls for this engine.

    Here is what I have;


    [​IMG]


    Maybe one will help....

    Good Luck
     

Share This Page