2008 zk

Discussion in 'Wright Manufacturing, Inc. (Archived)' started by mrbs66, Jan 4, 2012.

  1. mrbs66

    mrbs66 LawnSite Member
    Posts: 5

    ive got a 61" 31hp zk that i blew up and looking at dropping a 34hp in her. does anybody know if i will need to modify anything to make it work? thanks
     
  2. WrightCommercial

    WrightCommercial Inactive
    Posts: 526

    mrbs66,

    We did fit a 37hp on an early prototype but never took it further. It would more than likely fit on the mower but there are a couple things to keep in mind, first the muffler from the 31hp won't work on the 34hp and second depending on what clutch is on the mower currently it might not be rated for that horsepower. The first clutch we used in production was spec'd for the use up to the 37hp but since we didn't use that engine we changed the clutch.

    Best Regards
    Wright Mfg.
     
  3. mrbs66

    mrbs66 LawnSite Member
    Posts: 5

    ok, thanks for your help. these machines are animals and are extremely bullet proof. keep up the good work, mr. b
     

Share This Page