2010 lesco hyd slit seeder

Discussion in 'Marketplace' started by MCFISH, Apr 12, 2011.

  1. MCFISH

    MCFISH LawnSite Member
    from iowa
    Posts: 107

    2010 Lesco Hydraulic Renovator 20.
    model # 995722 with a 9 hp Subaru EX270 Engine.

    I bought this machine to seed my yard and ran it about 3 hours, ran one 50 pound bag of seed thru it. This machine is in almost new condition. I paid $3050 for it, will let it go for $2200.

    The machine is in north east Iowa.
    You can contact me at (319) 327-4443

    IMGP0887.jpg

    IMGP0889.jpg

    IMGP0888.jpg
     
  2. MCFISH

    MCFISH LawnSite Member
    from iowa
    Posts: 107

    This is seeding season,
     
  3. MCFISH

    MCFISH LawnSite Member
    from iowa
    Posts: 107

    Maybe something can be worked out to get it shipped to you. What state are you in?
     
  4. MCFISH

    MCFISH LawnSite Member
    from iowa
    Posts: 107

    Saturday bump
     
  5. Laner

    Laner LawnSite Senior Member
    Posts: 323

    Where on NE Iowa? Looking for a good slit seeder.
    Posted via Mobile Device
     
  6. MCFISH

    MCFISH LawnSite Member
    from iowa
    Posts: 107

    I'm on a farm half way between Cedar Rapids and Waterloo. Nearest town of any size would be Independence nine miles to the north.
     
  7. Laner

    Laner LawnSite Senior Member
    Posts: 323

    I'm near New Hampton. You said you ran 50 lbs through it. How were the results? Was it easy to use?
    Posted via Mobile Device
     
  8. MCFISH

    MCFISH LawnSite Member
    from iowa
    Posts: 107

    New Hampton that is not to far I could deliver it there if you were interested in the machine.

    The machine drives its self the only thing the operator has to to is turn it around to change directions. Just push a lever and to make it go forwards or reverse.

    The results came out very good. I broadcast a few hand fulls of seed over the area before running the seeder, to keep from getting those little corn rows. that little trick made the grass come up thick and even.
     
  9. Laner

    Laner LawnSite Senior Member
    Posts: 323

    I am interested. Just have heard mixed reviews on the Lesco unit. Would really like to have a Lawn Solutions, however they are hard to find used. Is there anything that the machine needs? What about replacement parts since JD has aquired Lesco?
     
  10. MCFISH

    MCFISH LawnSite Member
    from iowa
    Posts: 107

    The machine doesn't need anything it's in like new condition. This thing is heavy duty unlike most of the other units I seen. I lever seen a lawn solutions units in person because they don't have any stores to look at them.

    As far as parts go that's one reason I bought this machine. With Lesco (or John Deere landscape as they are called now) having a brick and mortar location near me in Iowa. I know John Deere guarantees your part in 24 hours. It comes with a parts book.
     

Share This Page