2013 Rigs!!

Discussion in 'Original Pictures Forum' started by LandFakers, Apr 2, 2013.

  1. 01thump

    01thump LawnSite Member
    from orlando
    Posts: 200

    [​IMG]My stuff..made all the brackets and boxes on the trailer only thing I did not make is the trimmer racks I did add the hand tool holders to them though..everything has a spot on my trailer and all locked down four keys will unlock everything..trailer is 6x12 it works for me..
     
  2. 01thump

    01thump LawnSite Member
    from orlando
    Posts: 200

    truck and trailer..[​IMG]
     
  3. 01thump

    01thump LawnSite Member
    from orlando
    Posts: 200

    [​IMG]Cages full of stuff..
     
  4. THEGOLDPRO

    THEGOLDPRO LawnSite Fanatic
    Posts: 5,223

    You should have bought the 5 pack of master locks like i did, 1 key opens all the locks.
     
  5. 01thump

    01thump LawnSite Member
    from orlando
    Posts: 200

    ^^^my locks where free..
     
  6. JDz425

    JDz425 LawnSite Member
    Posts: 43

    My 2013 Rig! John deere has 205.4 hours on it, I am going to run it till it dies and then I am looking to buy a Scag or Exmark not sure which yet.

    GO PRO ETC 152.jpg
     
  7. FerrisDiesel

    FerrisDiesel LawnSite Senior Member
    Posts: 441

    I need to get pictures of the mowers, just been super busy as of late!

    IMG_20130509_084142_857.jpg
     
  8. FerrisDiesel

    FerrisDiesel LawnSite Senior Member
    Posts: 441

    Yes........that is the dump bed insert I had in the back of my truck last year. I was getting tired of driving around with the insert in the back of the truck all the time, I do this part time. I was also getting tired of lifting the green barrels into the back of the truck. This is much lower, and makes it much easier for me to empty the Walker into the barrels and lift it 2 feet as opposed to 4 feet. I have saved so much time by having it set up this way, at least an hour a day. I no longer have to disconnect the truck to dump, I just pull up to the dump site and push the button in the cab.

    My plan is to use it like this for a couple months, and when it slows down a bit, make a 6' x 7'x 4' container and put that on the front of the trailer instead of the dump bed insert. This will increase my capacity, allowing me to dump once a week saving me disposal fees! I also plan on putting a bi fold ramp on the side so I can back my Walker up the ramp and just dump right into the container.......reducing my use of the green barrels as much as I can :usflag:
     
  9. exmarkking

    exmarkking LawnSite Bronze Member
    Posts: 1,012

    The rigs
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Posted via Mobile Device
     
  10. TriCityLawnCareLLC

    TriCityLawnCareLLC LawnSite Bronze Member
    from Ohio
    Posts: 1,024

    you can see photos of my stuff by clicking the link to my thread in my sig.
     

Share This Page