250 Update

Discussion in 'Heavy Equipment & Pavement' started by Fieldman12, Jan 28, 2008.

  1. Fieldman12

    Fieldman12 LawnSite Bronze Member
    Posts: 1,504

    Well, I have all new pins and bushings installed where the bucket curls on my 250 Series II Deere. I put it all back together last week. All the other pins and bushings in the Vertical lift boom setup seem to be fine. I have to admit it really is not that bad of a job once you know how everything comes apart. It cost me about $280 dollars to do all of it. Deere does make the shimms that also shim the quick attach plate from side to side. Had to get ahold of the right person at Deere in order to get me some. Anyway the shims are .060 think. Now I should be ready for spring.:usflag:
     
  2. cat2

    cat2 LawnSite Senior Member
    from Mi
    Posts: 891

    well thats good to hear. i if ever need to do this at least there is someone that can walk me threw it:cool2:
     
  3. Fieldman12

    Fieldman12 LawnSite Bronze Member
    Posts: 1,504

    Yes, give me a shout when your ready.
     

Share This Page