26000 Lbs. Single Axle?

Discussion in 'Trucks and Trailers' started by earthmover, Jul 18, 2006.

  1. earthmover

    earthmover LawnSite Member
    from NJ
    Posts: 122

    How much could a 26,000 Lb. dump truck tow. Im thinking a used International 4700 or 4900 with 190 to 210 hp. I would like to tow a backhoe or a dozer with it. Could it be done?
     
  2. Scag48

    Scag48 LawnSite Fanatic
    Posts: 6,067

    Almost impossible. A truck with that kind of GVWR would weigh at least 12K, plus a trailer, plus a backhoe. You'd be sitting right about 18-19K depending on trailer weight before you even put a backhoe on the thing.
     
  3. earthmover

    earthmover LawnSite Member
    from NJ
    Posts: 122

    Im talking the towing capacity of 26,000lb. dump towing a trailer and I want to know how much weight the truck can tow.
     
  4. Mike33

    Mike33 LawnSite Bronze Member
    Posts: 1,649

    Listen to what the guy just told you. I pull only a bobcat and hoe attm. and that with trailer is around 10,000 or more. I have a guy with a single axle ford it is either a 8000 or 9ooo series and he can haul 11-12 ton legal. last week we loaded him with fill dirt to haul away and dot stopped him. His weight was okey he weighed 38,000 and was tagged for 40,000. So your truck tagged at 26,000 will not do much as far as the weight to be legal. Be very careful dot fines are not cheap and heaven forbid if you get in a wreck.
    Mike
     
  5. hosejockey2002

    hosejockey2002 LawnSite Bronze Member
    Posts: 1,195

    It could be done. For a 580-size backhoe, you'd have to license it for around 50-52K, and watch how much weight you carry in the truck. If you plan on toting a construction-size machine around, you may want to consider a 34K single axle or a tandem. You'll be well into class A CDL territory any way you go. With that size machine, there's just no way around it if you want to be legal.
     
  6. oldrustycars

    oldrustycars LawnSite Senior Member
    Posts: 301

    ive towed case 580E and deere 310C backhoes with a truck smaller than that, Isuzu FTR, on a 9 ton 3 axle trailer, it worked ok. must be loaded properly, and with properly working trailer brakes. wouldnt be my firsthioce, but it worked fine for the 4 years i worked for that guy.
     
  7. earthmover

    earthmover LawnSite Member
    from NJ
    Posts: 122

    Im talking if everything is registered correct for the weight and have a class a cdl would this truck pull a 13 ton trailer considerinbg the dump bed is empty.
     
  8. McKeeLand

    McKeeLand LawnSite Senior Member
    Posts: 681

    A 26000 GVW is the gross weight of the truck and the load its carrying not the load it can tow. That is the GCVW( gross combined vehicle weight) which can and is more than the GVW simple by registering the vehicle for that weight. My F-450 has a GVW of 15000#, but a towing capacity much higher than that, up to 33000#. That would mean that i could only tow 5000# if you went by the GVW. To answer your question, a truck with a 26000# gvw is more than adequate to tow a 580E or equivalent. You will be in CDL weight though.
     
  9. earthmover

    earthmover LawnSite Member
    from NJ
    Posts: 122

    Thanks thats what I wanted to know.
     
  10. Scag48

    Scag48 LawnSite Fanatic
    Posts: 6,067

    Oh I see, I misunderstood your intent. You should be more than adequate to tow with a truck tagged for 26,000, but the rating for the truck doesn't really mattter though because the 26,000 is only the capacity for the tow vehicle. You'd have to tag the truck for about 50-52K, but yeah, you could do it.
     

Share This Page