3 Bag Exmark Ultravac bagger

Discussion in 'Marketplace' started by kc2006, Dec 15, 2006.

Thread Status:
Not open for further replies.
  1. kc2006

    kc2006 LawnSite Silver Member
    Posts: 2,442

    I have an ultravac bagger system, its the bigger 3 bag set up. This is a complete set up not missing anything. I used it for maybe 30 hours only, so its still very new. It's a great set up but I just have no use for it, I don't do much leaf work so I'll stick with my old methods of leaf removal. Installation isn't hard at all, it took me I think 1.5-2 hours tops to install.

    I'd like to get 2100 out of it, I think its worth that. New was 2475 plus tax so your saving about $500 and as I said 30 hours is hardly anything. Send me a PM if your interested, I'm in NE ohio, I could deliever up to a couple hours if you pay for fuel and buy me lunch. I'll get more pics if anyone is interested, most of it is off the mower now except the rear bracket.
     
  2. kc2006

    kc2006 LawnSite Silver Member
    Posts: 2,442

    To the top.
     
  3. kc2006

    kc2006 LawnSite Silver Member
    Posts: 2,442

    To the toppy
     
  4. DSLND

    DSLND LawnSite Bronze Member
    Posts: 1,205

    Do you have any pictures? -Mitch-
     
  5. kc2006

    kc2006 LawnSite Silver Member
    Posts: 2,442

    I'll get pictures tonight.
     
  6. mad_wrestler

    mad_wrestler LawnSite Senior Member
    Posts: 339

    I'd like to get pics as well thanks
     
  7. kc2006

    kc2006 LawnSite Silver Member
    Posts: 2,442

    here's the hood of the hopper, as you can see it's in perfect shape. I didn't wash any of this stuff off either, just took the big pieces off and put the mower away.

    100_5947.JPG
     
  8. kc2006

    kc2006 LawnSite Silver Member
    Posts: 2,442

    Heres the blower assembly. It's dirty as you can see.

    100_5948.JPG
     
  9. kc2006

    kc2006 LawnSite Silver Member
    Posts: 2,442

    And the bags. They're all fine, no rips or anything.

    Not pictured is the weights, the rear bracket (still on the mower), the pulley that runs the blower (on the mower) and the new plastic belt shield. This is a complete set up though, just bolt it all on your mower and your good to go.

    I'm going to put it on ebay in a week or two if it doesn't sell. So let me know if your interested.

    100_5949.JPG
     
  10. mad_wrestler

    mad_wrestler LawnSite Senior Member
    Posts: 339

    Seems high especially after shipping.
     
Thread Status:
Not open for further replies.

Share This Page