3 point aerator

Discussion in 'Tractors' started by Imow4u2, Jan 18, 2004.

  1. Imow4u2

    Imow4u2 LawnSite Senior Member
    Posts: 377

    I'm looking for a 3 point aerator, Cat. "0" for my John Deere 420.. I used a classen pull type last spring, I think the 3 point will be alot handier for turning and crossing sidewalks and drives, etc.. If anyone has one to sell or a good source for a 42 or 48 inch model let me Know..
     
  2. PaulJ

    PaulJ LawnSite Bronze Member
    Posts: 1,776

    YOu might be able to convert your classen pull type to a three point. I htink they are basicly the same unit with different brackets. I know of Classen, turfco, lesco, turfvent, ryan, and Maybe blutebird. All make three point versions of thier aerators.
    I am looking into getting a pull type myself.
     
  3. Imow4u2

    Imow4u2 LawnSite Senior Member
    Posts: 377

    Thanks Paul, I think I met you at the flex-deck BBQ last spring... I have some literature on most of those brands and thay are all cat. 1. I realize I can use the cat. 0 pins, but there is also a dementional difference in the set-up between "0" and "1"
    The Classen that I used last spring was Capt. Devo's and I just used it on my acre and a half. This spring I would like to either buy or rent one and make some money before cutting and spring clean-ups..
     
  4. PaulJ

    PaulJ LawnSite Bronze Member
    Posts: 1,776

    I didn't catch the catagory difference, that could be a problem.
    You might have to modify one to fit. good lick.
     
  5. Itsgottobegreen

    Itsgottobegreen LawnSite Silver Member
    Posts: 2,177

    Millcreek makes a mini airator for 0 and limited 1 classes. I have a 60" on my Kubota B7500 But they run about $1500. I got mine used for $375 plus tax, $50 in new bushings, $10 in paint. I had to do some rewelding and sandblasting. I had one friend offer me $1000 for it.
     

Share This Page