1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

32 or 36

Discussion in 'Lawn Mowing' started by john_texas, Dec 15, 2007.

  1. john_texas

    john_texas LawnSite Member
    Posts: 1

    Which siize would be better a 32 or 36,
  2. BanvilleLawnCare

    BanvilleLawnCare LawnSite Member
    Posts: 190

    That was a pretty vague question but if the 36 will fit into all gates and tight places get the extra 4 inches
  3. South Florida Lawns

    South Florida Lawns LawnSite Platinum Member
    from usa
    Posts: 4,785

    Better for what? I like the 32's because gates down here can be really small!

    SNAPPER MAN LawnSite Silver Member
    Posts: 2,443

    In houston here most gates you cant even fit a 36 through so a 32 comes in handy alot.

    DLAWNS LawnSite Fanatic
    Posts: 5,778

    I agree, go with the 32. Thats what I did and it gets me into a few of my yards...barely.
  6. Frue

    Frue LawnSite Bronze Member
    Posts: 1,472

    36 for me it gets thru gates well up here.
  7. J&R Landscaping

    J&R Landscaping LawnSite Fanatic
    Posts: 5,096

    I have a Exmark metro 36" mower. I like it and use it only for gated yards, but I have run into several gates that I needed a 32" mower to get through.
  8. KS_Grasscutter

    KS_Grasscutter LawnSite Gold Member
    Posts: 3,332

    I would get the 32", got quite a few 3 foot gates around here that a 36" WB wont fit in (Esp. a 36" WB that is 39" wide, not naming any names there, but nothing about that seems better and using a 21" anyway sure aint any quicker...).
  9. mag360

    mag360 LawnSite Silver Member
    Posts: 2,446

  10. Doogiegh

    Doogiegh LawnSite Senior Member
    Posts: 871

    32 will interchange blades with a 48 (if you have one)

Share This Page