32" stander in truck bed?

Discussion in 'Lawn Mowing' started by Coumbe, Mar 28, 2007.

  1. Coumbe

    Coumbe LawnSite Senior Member
    Posts: 270

    Will the 32" Stander(Wright) go in an 8' truck bed and turn sideways?
     
  2. mcduff48

    mcduff48 LawnSite Member
    Posts: 96

    Only if you can get it up in front of the wheel wells. The 32" Stander is only
    33.5" wide but it is 58" long and you have 48" between the wells.:usflag:
     
  3. AbsoluteH&L

    AbsoluteH&L LawnSite Member
    Posts: 155

    Your trying to put 2 pounds of stuff in a one pound bag aren't you? haha What else are you trying to put in there at the same time?
     
  4. lawnlubber

    lawnlubber LawnSite Member
    Posts: 186

    The Stander is more difficult to get into or on a truck than a wb. It weighs a couple hundred pounds more so you need good heavy duty ramps. The ramps need to be kind of long because of the height of a truck and the fact that you are not able to safely drive it on the rear wheels alone (the deck catches the ramp where it meets the truck if the angle of the ramp is too steep). I doubt there is room in a pickup to turn the mower, on a bigger truck maybe.
     

Share This Page