36" Exmark Metro w/ Grass Catcher

Discussion in 'Marketplace' started by lukemelo216, May 4, 2009.

  1. lukemelo216

    lukemelo216 LawnSite Bronze Member
    from ...
    Posts: 1,267

    Selling my 36" Exmark Metro:

    36" free floating deck (no longer made, easier adjustment compared to current models which require you to adjust washers)

    Brand new 14hp (ill get back to you with the brand) engine and transmission

    All new belts and blades

    I just bought this mower at the beginning of the year, but need something bigger. There is absolutely nothing wrong with this machine what so ever. Starts on the first pull each time, and lays some stripes like you wouldnt believe with no kit. Engine and transmission replaces due to the age of the machine (early 2000's) New engine doesnt even have 25 hours on it yet.

    Also comes with a Grass Gobbler.

    Asking 1600 obo

    I will post pictures tomorrow after I return from the shop. PM me or reply to this ad. I am located in SE WI about 40 minutes south of Milwaukee. Pick up preferred, but I will deliver for a price of $1.25 per mile loaded up to 150 miles.
     
  2. lukemelo216

    lukemelo216 LawnSite Bronze Member
    from ...
    Posts: 1,267

    Bump to the top, will take 1400 obo. Posting pictures later today, need to move fast.
     
  3. lelandgray

    lelandgray LawnSite Member
    Posts: 31

    Too bad you're so far away!
     
  4. lukemelo216

    lukemelo216 LawnSite Bronze Member
    from ...
    Posts: 1,267

    Pictures are attached. Engine is a 14hp Kawasaki engine. Mower and catcher are a little dirty, didnt get around to cleaning the machine up, but it will be before sale occurs. Some rust in areas, but nothing major. Machine is in excellent condition waiting for a new owner to make some money with it. 1400 obo prefer pick up, but would be willing to deliver up to 150 miles at $1.25/mile. Outside of that range, I would be willing to have the machine shipped as well at buyers expense.

    DSCN0119.jpg

    DSCN0120.jpg

    DSCN0121.jpg

    DSCN0122.jpg

    DSCN0123.jpg
     
  5. gtabrams

    gtabrams LawnSite Member
    Posts: 41

    Do you know the year and hours on this?
     
  6. lukemelo216

    lukemelo216 LawnSite Bronze Member
    from ...
    Posts: 1,267

    I am not sure on the actual machine hours, but on the new engine there is somewhere between 15-25 hours, and the age of the machine is a 99 or 00 i believe.
     
  7. KCfireman

    KCfireman LawnSite Bronze Member
    Posts: 1,863

    That engine is brand new????????????
     
  8. lukemelo216

    lukemelo216 LawnSite Bronze Member
    from ...
    Posts: 1,267

    yup and let me just put this out there too. This machine was sitting in the back of a warehouse for about 2 to 3 years and never was used. The dealer I bought it from hired a new used salesman and he wanted to clear their warehouse out, and found this thing. There were some problems with the engine, so they replaced it, and then it sat for about 4 months or so before I bought it. They just used it as a loaner machine when guys needed one while theirs were getting repaired. So yes while it is 10 years old, it has not seen 10 years of constant cutting.
     
  9. lukemelo216

    lukemelo216 LawnSite Bronze Member
    from ...
    Posts: 1,267

    to the top
     
  10. lukemelo216

    lukemelo216 LawnSite Bronze Member
    from ...
    Posts: 1,267

    Price reduced to 1250, need to move this thing quick........I am willing to ship. Have a quote from Milwaukee WI to OK for $325.
     

Share This Page