36" Scag belt drive

Discussion in 'Marketplace' started by Groh's Mows, May 26, 2008.

  1. Groh's Mows

    Groh's Mows LawnSite Member
    Posts: 155

    I had been sitting on listing this, but saw a post looking for a similar mower and decided to put it out there. This is my 2006 Scag 36" belt drive model SW with the 16 hp KAI engine and 5 speed and fixed deck. I replaced it with a TTHP but actually still have been using this quite a bit. Mower has about 70 hours on it right now with almost 60 hours showing on the current hour meter. First meter quit at either 10 or 13 hours. I purchased this from a lawn service in Omaha NE that had gotten it about a week before going out of business and it was basically brand new. Includes the factory soft bagger, my homemade mulch plate, a new in the box hurricane mulch kit and one set each of factory high lifts and gator mulch blades. Solo operator, so only I have run it and used Mobil 1 10W30 after break-in. $2000 for everything, but open to offers. I only log on from time to time so PM me your phone number if interested.

    096_96.jpg

    097_97.jpg

    101_101.jpg

    104_104.jpg
     
  2. PMLawns

    PMLawns LawnSite Member
    Posts: 85

    bump.......
     
  3. PMLawns

    PMLawns LawnSite Member
    Posts: 85

    ...I wasn't sure if you saw my post....but I am interested in your mulch kit. Please let me know what you think. I am curios as to what shipping may be. Let me know how you make out.
     
  4. lgyardservices

    lgyardservices LawnSite Senior Member
    Posts: 329

    I will offer you $2150 shipped to 82601
     
  5. Groh's Mows

    Groh's Mows LawnSite Member
    Posts: 155

    PM Lawns, I sent you a pm about it. Post or zip code or pm it to me and I will try to get by mailboxes etc. or somewhere like that to get a price to ship to you. The box the mulch kit cames in is fairly large but not all that heavy. I might be able to pack it in a smaller box for a little cheaper rate. Everything is there and the hardware is all in an unopened plastic bag. I just looked at the invoice and I paid 300 with tax. I would take 175 plus the cost to ship just to be rid of it.
     
  6. Groh's Mows

    Groh's Mows LawnSite Member
    Posts: 155

    lgyardservices, I looked at all posts by you and you have made offers on about 10-15 items on this forum shippped to your zip code. I would be willing to ship the mower and I have a couple pallets and a pick-up with a lift gate so truck shipping from a terminal to a terminal near you is doable. That said, the money would have to be in my hot little hand first so I don't know how serious you are. Personally I wouldn't buy a mower without looking at it and running it, but that it just me. In this case you would be in luck as I am an honest person and the mower is in great shape and cuts and runs great so let me know.
     
  7. lgyardservices

    lgyardservices LawnSite Senior Member
    Posts: 329

    Well yeah i have made a lot of posts lately with offers for walkbehinds. =)
    I am really desperate for a bigger mower this year and there seems to be a lot for sale on this forum. but anyways, I am really interested in the mower. And yeah defiantely, i would send you a check before you shipped it or whatever. Please keep me posted on what you think. And maybe a few more pics? thanks
     
  8. PMLawns

    PMLawns LawnSite Member
    Posts: 85

    My zip is 17356 for that mulch kit.
     
  9. Groh's Mows

    Groh's Mows LawnSite Member
    Posts: 155

    "I will offer you $2150 shipped to 82601"

    Called around about shipping this morning. Terminal to terminal is the most cost effective way to ship something this large. The best rate I found was just under $500 to a freight terminal in Barr Nunn or Evansville. I am guessing these towns are right next to Casper. I would sell it to you shipped for $2250 including the bagger, cloth bag and a mulch plate I made that closes off the deck using the bagger mount (It will mulch fairly well in weekly mowing with this modification and mulches leaves in the fall to a fine dust). One extra set of gators and one set high-lifts plus the gator blades on the mower would be on the pallet and I would send along the manual and all paperwork I have. I won't include the mulch kit at that price as I may have it sold separately. All the oil and gas has to be drained to ship a mower so it would have no oil in the crankcase when you receive it.
     
  10. ChrisT300

    ChrisT300 LawnSite Member
    Posts: 1

    Im in st. louis would you take $1500 and meet half way. I have cash
     

Share This Page