1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

36" Snapper Pro Hydro SPLH140KW Garrettsville OH

Discussion in 'Marketplace' started by hardtail70, Oct 1, 2009.

  1. hardtail70

    hardtail70 LawnSite Member
    Posts: 19

    36" Snapper Pro Hydro SPLH140KW

    Kawasaki FC420V engine. Pull Start.

    36" Commercial hydro drive walk behind lawn mower. 36" Floating Deck. Starts in 2 to 3 pulls. Runs great!!!

    $1200.00

    330-310-5432 Leave message if no answer.

    36 snapper pro 001.jpg

    36 snapper pro 002.jpg

    36 snapper pro 003.jpg

    36 snapper pro 004.jpg
     
  2. silverado212

    silverado212 LawnSite Senior Member
    Posts: 373

    Will this fit through a standard gate? Also how many hrs on it?
     
  3. hardtail70

    hardtail70 LawnSite Member
    Posts: 19

    define standard gate. a standard 48" gate yes. it should fit through a 36" opening carefully kinda wiggling it through. I bought it for the once in a while smaller gate my 52 wouldnt fit through. I mainly used it to cut my grass at home and there is no hour meter so it would be a guess.
     
  4. silverado212

    silverado212 LawnSite Senior Member
    Posts: 373

    I think standard gate is like 42" I think. I would like to have this one but I am picking up a 52" just like it in a few days and would need to get rid of a 32 and 44 first.
     
  5. hardtail70

    hardtail70 LawnSite Member
    Posts: 19

    Than it will fit through a standard gate.
     
  6. silverado212

    silverado212 LawnSite Senior Member
    Posts: 373

    Id might be interested for a lower price.
     
  7. joeman13

    joeman13 LawnSite Member
    Posts: 25

    I might be interested in this wb. I've been looking for one for a while. I'm just thinking that $1,200 might be a little too much. The rust shows its age. How many hours on it?
    Thanks.
    P.S. Whats the least you'll take for it?
     
  8. hardtail70

    hardtail70 LawnSite Member
    Posts: 19

    well as I said before there is no hour meter so it would be a guess. The pictures make it look worse than it looks there was leaves on it when I took the pics I would consider $1000.
    It does run good
     
  9. joeman13

    joeman13 LawnSite Member
    Posts: 25

    Not too crazy about the rust but i guess you could sand/repaint those parts.
     
  10. hardtail70

    hardtail70 LawnSite Member
    Posts: 19

    New Pictures

    36 snapper 001.jpg

    36 snapper 002.jpg

    36 snapper 003.jpg

    36 snapper 004.jpg

    36 snapper 005.jpg
     

Share This Page