46-0-0

Discussion in 'General Industry Discussions' started by 1momoney, Mar 11, 2006.

  1. 1momoney

    1momoney LawnSite Member
    Posts: 2

    How much 46-0-0 should I mix in a 200 gal tank and when will I see a difference? Thanks
     
  2. DUSTYCEDAR

    DUSTYCEDAR LawnSite Fanatic
    from PA
    Posts: 5,137

    r u serious:drinkup:
     
  3. westwind

    westwind LawnSite Senior Member
    Posts: 444

  4. nephilim0167

    nephilim0167 LawnSite Member
    Posts: 144

    Holy nitrogen.
     
  5. Runner

    Runner LawnSite Fanatic
    Posts: 13,494

    A train leaves Chicago bound for New York...How long will it take to get there?
     
  6. lawnmaniac883

    lawnmaniac883 LawnSite Silver Member
    Posts: 2,613

    LOL!!! Burn baby burn...
     
  7. SodKing

    SodKing LawnSite Bronze Member
    Posts: 1,648

    Its an old Chem lawn trick that is still used today. I used to do it years ago when we ran short on liquid fert. We used between 50 and 75 pounds 46-0-0 in a 300 gallon tank and it worked quite rapidly. Yes you could burn the turf in hot weather but since this was usually done in the spring it was not a problem...The fungus that followed, well thats a different story.
     
  8. TURF DOCTOR

    TURF DOCTOR LawnSite Silver Member
    Posts: 2,138

    Well it's no mystery you have been to lesco what did they tell you to do.
     
  9. PLM-1

    PLM-1 LawnSite Bronze Member
    Posts: 1,640

    When i saw 46-0-0, the first thing i thought of was Tru-Brown Chem Lawn! :hammerhead:
     
  10. SodKing

    SodKing LawnSite Bronze Member
    Posts: 1,648

    I will add that I never worked for Tru-Green but I did know an ex-applicator and I was down on material at the end of a round and couldn't get a delivery in time...
     

Share This Page