1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

481398 scag pulley 6.35 dia taperbore needed

Discussion in 'Marketplace' started by weldondl, May 21, 2012.

  1. weldondl

    weldondl LawnSite Member
    Posts: 33

    STT61A-25CH (S/N 6710001-6719999)need deck drive pulley 481398 it is 6.35 dia taper bore this is the one that is on the spindle that drives the shaft that hooks to the gearbox on deck. yep I rebuilt the spindle and during re-instalation of pulley cranked it to far onto tapered bushing and snap,:cry: it split. learned something new today. lol so if anybody got a parted out scag tiger i could use the pulley off it.
  2. DaveWB

    DaveWB LawnSite Senior Member
    from SE WI
    Posts: 265

    Check out surpluscenter.com they might have a pulley that size.
  3. wahlturfcare

    wahlturfcare LawnSite Senior Member
    from iowa
    Posts: 532

    i may have a couple spares available. But i know bearing shopes carry steel ones that wok with the sleeve.
  4. Johnagain

    Johnagain LawnSite Senior Member
    Posts: 381

    Just go to the scag dealer they are only $35-$40.

Share This Page