61" Surfer

Discussion in 'Marketplace' started by fourbybud, Mar 13, 2008.

  1. fourbybud

    fourbybud LawnSite Member
    from Ohio
    Posts: 196

    Well here goes. I am looking at selling or trading in my Great Dane Surfer. Less than 800 hrs, 22hp Kohler, cosmeticaly fine. I have owned for less than 70hrs and replaced many things. Rear tires, front tires and rims, hydro oil and filter, engine oil and filter, air and fuel filter, both ignition coils, hour meter, ignition switch, rubber discharge chute(off of an Everride), spark plugs, rebuilt carb, voltage regulator, rebuilt starter, battery, and just about anything else to make it good and reliable. Comes with extra set of Gator blades and a complete set of belts.
    This is one of the very 1st gen Surfers. I did have a rod welded to the left side of deck for support when trimming to close. The deck has also had the upgraded bracket installed by the front casters. Please only make serious offers. Reason for selling is I do not need three 60" plus decks.
     
  2. thefed

    thefed LawnSite Senior Member
    from Ohio
    Posts: 350

    How much? Need a 60" ridersoon, we're in Akron

    PM me or email info at ayden dot biz
     
  3. thefed

    thefed LawnSite Senior Member
    from Ohio
    Posts: 350

    any pics? what year is the model?
     
  4. fourbybud

    fourbybud LawnSite Member
    from Ohio
    Posts: 196

    I will post pics this weekend. I took some with my cell but they are not any good.
    MODEL GDSZ22KHE
    SERIAL 10456
    Hope this helps on figuring out the year. Also has a new muffler.
     
  5. fourbybud

    fourbybud LawnSite Member
    from Ohio
    Posts: 196

    Here are some pics I took today 3-14-08. Engine is running in pics.

    jan 27 005.jpg

    jan 27 006.jpg

    jan 27 007.jpg

    jan 27 008.jpg
     
  6. casco73

    casco73 LawnSite Member
    Posts: 246

    Whats yor price??
     
  7. fourbybud

    fourbybud LawnSite Member
    from Ohio
    Posts: 196

    Lets start around 3000.00 and work it from there.
    I have seen them all over the place on price. Hope this seems fair. If not make an offer. The worst I can say is no.:usflag:
     
  8. thefed

    thefed LawnSite Senior Member
    from Ohio
    Posts: 350

    how old is the machine. year?
     
  9. thefed

    thefed LawnSite Senior Member
    from Ohio
    Posts: 350

    and what happened with all those problems you posted about a few weeks ago? (bogging,dying, etc)
     
  10. fourbybud

    fourbybud LawnSite Member
    from Ohio
    Posts: 196

    It was the coil next to the muffler. So I replaced both of them. Runs better now than it ever has since I got it.
     

Share This Page