1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

7x16 Enclosed Trailer Setup

Discussion in 'Original Pictures Forum' started by Davids Lawncare, Feb 19, 2013.

  1. Davids Lawncare

    Davids Lawncare LawnSite Member
    Posts: 70

    I purchased my first enclosed trailer this season and have been using this site for different trailer setup ideas . I just have few more shelves that I need to build for small items .Also I'm thinking that I need a brake controller because I see no wires connecting to the drums under the trailer just two wire coming out the drums on each side. So here is where I am so far with my enclosed trailer setup I hope you like. Comments and suggestions are welcome.:waving:
     
  2. Jaybrown

    Jaybrown LawnSite Bronze Member
    Posts: 1,160

    Post lots of pics please
     
  3. PetesLandscape&Supply

    PetesLandscape&Supply LawnSite Member
    Posts: 93


    ______________what he said ! :blob2:
     
  4. Landrus2

    Landrus2 LawnSite Platinum Member
    Posts: 4,811

    Pictures pictures and more pictures :waving::waving::waving:
     
  5. scott lawn

    scott lawn LawnSite Member
    Posts: 32

    Show a lot of pics
     
  6. Davids Lawncare

    Davids Lawncare LawnSite Member
    Posts: 70

    sorry here they are.

    IMG_0701.JPG

    IMG_0909.jpg

    IMG_0908.jpg

    IMG_0905.jpg

    IMG_0906.jpg

    IMG_0907.jpg
     
  7. Schrock Lawns

    Schrock Lawns LawnSite Senior Member
    Posts: 944

    Can you post a picture of how you have your hedge trimmers mounted?
    Posted via Mobile Device
     
  8. PetesLandscape&Supply

    PetesLandscape&Supply LawnSite Member
    Posts: 93

    Excellent David....looks very professional !!
     
  9. Davids Lawncare

    Davids Lawncare LawnSite Member
    Posts: 70

    The hedge trimmers are mounted with the trimmers on top row at the shaft . But I used 2 small bungy cords the hold the cutting head in place from moving up and down. I will try to get a close up picture tomorrow.
     
  10. jrs.landscaping

    jrs.landscaping LawnSite Silver Member
    from Maine
    Posts: 2,715

    Really like that trailer setup :clapping:
     

Share This Page