96 vortec eng?

Discussion in 'Trucks and Trailers' started by 4x4k20, Jan 29, 2001.

  1. 4x4k20

    4x4k20 LawnSite Member
    from ga
    Posts: 148

    anyone know how to install dist. on 350 vortec eng.? you have to do it differnt than you do on a older model i have heard that if you take it out it has to go back in the same position that it came out problem is that eng. was turned over with dist, out .
  2. Migs

    Migs LawnSite Member
    Posts: 14

    should be the same as any chevy V8 dist install you need to index the rotor on the dist to the #1 terminal on the cap, then place the engine on #1 tdc and remember that the dist will turn about a 1/4 turn as you install it down and the gears mesh with the cam gear the prob is there is no adjustability clockwise once it is in place due to the computer adjusting the timing by itself so you may have to do it a couple of time before it works itself into the right location.

Share This Page