Adding fluid to pump

Discussion in '<a href=http://www.plowsite.com target=_blank ?>Sn' started by dfor, Mar 3, 2001.

  1. dfor

    dfor LawnSite Senior Member
    Posts: 824

    Is it as simple as just taking the bolt out and adding fluid or does it need to be bled afterwards. 8' Diamond. Thanks.
     
  2. 75

    75 LawnSite Senior Member
    Posts: 992

    As long as air hasn't gotten into the system (I'm making the assumption you're just topping up) it's just a matter of remove the fill plug & add fluid. Make sure your lift cylinder is all the way down when you do this.

    If there is air in the system, you may need to enlist a helper to work the controls while you crack the fittings at the cylinders to get the air our.
     

Share This Page